Network Working Group J. Bradley Internet-Draft Ping Identity Intended status: Standards Track P. Hunt Expires: April 26, 2019 Oracle Corporation M. Jones Microsoft H. Tschofenig Arm Ltd. M. Mihaly NIIF Institute October 23, 2018 OAuth 2.0 Proof-of-Possession: Authorization Server to Client Key Distribution draft-ietf-oauth-pop-key-distribution-04 Abstract RFC 6750 specified the bearer token concept for securing access to protected resources. Bearer tokens need to be protected in transit as well as at rest. When a client requests access to a protected resource it hands-over the bearer token to the resource server. The OAuth 2.0 Proof-of-Possession security concept extends bearer token security and requires the client to demonstrate possession of a key when accessing a protected resource. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on April 26, 2019. Bradley, et al. Expires April 26, 2019 [Page 1] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. Processing Instructions . . . . . . . . . . . . . . . . . . . 4 4. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4.1. Symmetric Key Transport . . . . . . . . . . . . . . . . . 5 4.1.1. Client-to-AS Request . . . . . . . . . . . . . . . . 5 4.1.2. Client-to-AS Response . . . . . . . . . . . . . . . . 6 4.2. Asymmetric Key Transport . . . . . . . . . . . . . . . . 9 4.2.1. Client-to-AS Request . . . . . . . . . . . . . . . . 9 4.2.2. Client-to-AS Response . . . . . . . . . . . . . . . . 10 5. Security Considerations . . . . . . . . . . . . . . . . . . . 11 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13 6.1. OAuth Access Token Types . . . . . . . . . . . . . . . . 13 6.2. OAuth Parameters Registration . . . . . . . . . . . . . . 13 6.3. OAuth Extensions Error Registration . . . . . . . . . . . 13 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 14 8. References . . . . . . . . . . . . . . . . . . . . . . . . . 14 8.1. Normative References . . . . . . . . . . . . . . . . . . 14 8.2. Informative References . . . . . . . . . . . . . . . . . 15 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 16 1. Introduction The work on proof-of-possession tokens, an extended token security mechanisms for OAuth 2.0, is motivated in [21]. This document defines the ability for the client request and to obtain PoP tokens from the authorization server. After successfully completing the exchange the client is in possession of a PoP token and the keying material bound to it. Clients that access protected resources then need to demonstrate knowledge of the secret key that is bound to the PoP token. Bradley, et al. Expires April 26, 2019 [Page 2] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 To best describe the scope of this specification, the OAuth 2.0 protocol exchange sequence is shown in Figure 1. The extension defined in this document piggybacks on the message exchange marked with (C) and (D). To demonstrate possession of the private/secret key to the resource server protocol mechanisms outside the scope of this document are used. +--------+ +---------------+ | |--(A)- Authorization Request ->| Resource | | | | Owner | | |<-(B)-- Authorization Grant ---| | | | +---------------+ | | | | +---------------+ | |--(C)-- Authorization Grant -->| | | Client | (resource, req_cnf) | Authorization | | | | Server | | |<-(D)-- PoP Access Token ------| | | | (rs_cnf, token_type) +---------------+ | | | | +---------------+ | |--(E)-- PoP Access Token ----->| | | | (with proof of private key) | Resource | | | | Server | | |<-(F)--- Protected Resource ---| | +--------+ +---------------+ Figure 1: Augmented OAuth 2.0 Protocol Flow In OAuth 2.0 [2] access tokens can be obtained via authorization grants and using refresh tokens. The core OAuth specification defines four authorization grants, see Section 1.3 of [2], and [18] adds an assertion-based authorization grant to that list. The token endpoint, which is described in Section 3.2 of [2], is used with every authorization grant except for the implicit grant type. In the implicit grant type the access token is issued directly. This specification extends the functionality of the token endpoint, i.e., the protocol exchange between the client and the authorization server, to allow keying material to be bound to an access token. Two types of keying material can be bound to an access token, namely symmetric keys and asymmetric keys. Conveying symmetric keys from the authorization server to the client is described in Section 4.1 and the procedure for dealing with asymmetric keys is described in Section 4.2. This document describes how the client requests and obtains a PoP access token from the authorization server for use with HTTPS-based Bradley, et al. Expires April 26, 2019 [Page 3] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 transport. The use of alternative transports, such as Constrained Application Protocol (CoAP), is described in [23]. 2. Terminology The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY', and 'OPTIONAL' in this specification are to be interpreted as described in [1]. Session Key: In the context of this specification 'session key' refers to fresh and unique keying material established between the client and the resource server. This session key has a lifetime that corresponds to the lifetime of the access token, is generated by the authorization server and bound to the access token. This document uses the following abbreviations: JWA: JSON Web Algorithms[7] JWT: JSON Web Token[9] JWS: JSON Web Signature[6] JWK: JSON Web Key[5] JWE: JSON Web Encryption[8] CWT: CBOR Web Token[13] COSE: CBOR Object Signing and Encryption[14] 3. Processing Instructions Step (0): As an initial step the client typically determines the resource server it wants to interact with. This may, for example, happen as part of a discovery procedure or via manual configuration. Step (1): The client starts the OAuth 2.0 protocol interaction based on the selected grant type. Step (2): When the client interacts with the token endpoint to obtain an access token it MUST use the resource identicator defined in [15] when symmetric PoP tokens are used. For asymmetric PoP tokens the use of resource indicators is optional but recommended. Bradley, et al. Expires April 26, 2019 [Page 4] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 Step (2): The authorization server parses the request from the server and determines the suitable response based on OAuth 2.0 and the PoP token credential procedures. Note that PoP access tokens may be encoded in a variety of ways: JWT The access token may be encoded using the JSON Web Token (JWT) format [9]. The proof-of-possession token functionality is described in [10]. A JWT encoded PoP token MUST be protected against modification by either using a digital signature or a keyed message digest, as described in [6]. The JWT may also be encrypted using [8]. CWT [13] defines an alternative token format based on CBOR. The proof-of-possession token functionality is defined in [12]. A CWT encoded PoP token MUST be protected against modification by either using a digital signature or a keyed message digest, as described in [12]. If the access token is only a reference then a look-up by the resource server is needed, as described in the token introspection specification [22]. Note that the OAuth 2.0 framework nor this specification does not mandate a specific PoP token format but using a standardized format will improve interoperability and will lead to better code re-use. Application layer interactions between the client and the resource server are beyond the scope of this document. 4. Examples This section provides a number of examples. 4.1. Symmetric Key Transport 4.1.1. Client-to-AS Request The client starts with a request to the authorization server indicating that it is interested to obtain a token for https://www.example.com Bradley, et al. Expires April 26, 2019 [Page 5] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 POST /token HTTP/1.1 Host: server.example.com Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW Content-Type: application/x-www-form-urlencoded;charset=UTF-8 grant_type=authorization_code &code=SplxlOBeZQQYbYS6WxSbIA &redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb &resource=https://www.example.com Example Request to the Authorization Server 4.1.2. Client-to-AS Response If the access token request has been successfully verified by the authorization server and the client is authorized to obtain a PoP token for the indicated resource server, the authorization server issues an access token and optionally a refresh token. Figure 2 shows a response containing a token and a "cnf" parameter with a symmetric proof-of-possession key both encoded in a JSON-based serialization format. The "cnf" parameter contains the RFC 7517 [5] encoded key element. Bradley, et al. Expires April 26, 2019 [Page 6] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 HTTP/1.1 200 OK Content-Type: application/json Cache-Control: no-store { "access_token":"SlAV32hkKG ... (remainder of JWT omitted for brevity; JWT contains JWK in the cnf claim)", "token_type":"pop", "expires_in":3600, "refresh_token":"8xLOxBtZp8", "cnf":{ {"keys": [ {"kty":"oct", "alg":"A128KW", "k":"GawgguFyGrWKav7AX4VKUg" } ] } } } Figure 2: Example: Response from the Authorization Server (Symmetric Variant) Note that the cnf payload in Figure 2 is not encrypted at the application layer since Transport Layer Security is used between the AS and the client and the content of the cnf payload is consumed by the client itself. Alternatively, a JWE could be used to encrypt the key distribution, as shown in Figure 3. Bradley, et al. Expires April 26, 2019 [Page 7] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 { "access_token":"SlAV32hkKG ... (remainder of JWT omitted for brevity; JWT contains JWK in the cnf claim)", "token_type":"pop", "expires_in":3600, "refresh_token":"8xLOxBtZp8", "cnf":{ "jwe": "eyJhbGciOiJSU0EtT0FFUCIsImVuYyI6IkExMjhDQkMtSFMyNTYifQ. (remainder of JWE omitted for brevity)" } } } Figure 3: Example: Encrypted Symmmetric Key The content of the 'access_token' in JWT format contains the 'cnf' (confirmation) claim. The confirmation claim is defined in [10]. The digital signature or the keyed message digest offering integrity protection is not shown in this example but has to be present in a real deployment to mitigate a number of security threats. The JWK in the key element of the response from the authorization server, as shown in Figure 2, contains the same session key as the JWK inside the access token, as shown in Figure 4. It is, in this example, protected by TLS and transmitted from the authorization server to the client (for processing by the client). { "iss": "https://server.example.com", "sub": "24400320", "aud": "s6BhdRkqt3", "nonce": "n-0S6_WzA2Mj", "exp": 1311281970, "iat": 1311280970, "cnf":{ "jwe": "eyJhbGciOiJSU0EtT0FFUCIsImVuYyI6IkExMjhDQkMtSFMyNTYifQ. (remainder of JWE omitted for brevity)" } } Figure 4: Example: Access Token in JWT Format Bradley, et al. Expires April 26, 2019 [Page 8] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 Note: When the JWK inside the access token contains a symmetric key it must be confidentiality protected using a JWE to maintain the security goals of the PoP architecture since content is meant for consumption by the selected resource server only. The details are described in [21]. 4.2. Asymmetric Key Transport 4.2.1. Client-to-AS Request This example illustrates the case where an asymmetric key shall be bound to an access token. The client makes the following HTTPS request shown in Figure 5. Extra line breaks are for display purposes only. POST /token HTTP/1.1 Host: server.example.com Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW Content-Type: application/x-www-form-urlencoded;charset=UTF-8 grant_type=authorization_code &code=SplxlOBeZQQYbYS6WxSbIA &redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb &token_type=pop &req_cnf=eyJhbGciOiJSU0ExXzUi ... (remainder of JWK omitted for brevity) Figure 5: Example Request to the Authorization Server (Asymmetric Key Variant) As shown in Figure 6 the content of the 'req_cnf' parameter contains the ECC public key the client would like to associate with the access token (in JSON format). "jwk":{ "kty": "EC", "use": "sig", "crv": "P-256", "x": "18wHLeIgW9wVN6VD1Txgpqy2LszYkMf6J8njVAibvhM", "y": "-V4dS4UaLMgP_4fY4j8ir7cl1TXlFdAgcx55o7TkcSA" } Figure 6: Client Providing Public Key to Authorization Server Bradley, et al. Expires April 26, 2019 [Page 9] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 4.2.2. Client-to-AS Response If the access token request is valid and authorized, the authorization server issues an access token and optionally a refresh token. The authorization server also places information about the public key used by the client into the access token to create the binding between the two. The new token type "pop" is placed into the 'token_type' parameter. An example of a successful response is shown in Figure 7. HTTP/1.1 200 OK Content-Type: application/json;charset=UTF-8 Cache-Control: no-store Pragma: no-cache { "access_token":"2YotnFZFE....jr1zCsicMWpAA", "token_type":"pop", "expires_in":3600, "refresh_token":"tGzv3JOkF0XG5Qx2TlKWIA" } Figure 7: Example: Response from the Authorization Server (Asymmetric Variant) The content of the 'access_token' field contains an encoded JWT, as shown in Figure 8. The digital signature covering the access token offering authenticity and integrity protection is not shown below (but must be present). Bradley, et al. Expires April 26, 2019 [Page 10] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 { "iss":"xas.example.com", "aud":"http://auth.example.com", "exp":"1361398824", "nbf":"1360189224", "cnf":{ "jwk" : { "kty" : "EC", "kid" : h'11', "crv" : "P-256", "x" : b64'usWxHK2PmfnHKwXPS54m0kTcGJ90UiglWiGahtagnv8', "y" : b64'IBOL+C3BttVivg+lSreASjpkttcsz+1rb7btKLv8EX4' } } } Figure 8: Example: Access Token Structure (Asymmetric Variant) Note: In this example there is no need for the authorization server to convey further keying material to the client since the client is already in possession of the private key (as well as the public key). 5. Security Considerations [21] describes the architecture for the OAuth 2.0 proof-of-possession security architecture, including use cases, threats, and requirements. This requirements describes one solution component of that architecture, namely the mechanism for the client to interact with the authorization server to either obtain a symmetric key from the authorization server, to obtain an asymmetric key pair, or to offer a public key to the authorization. In any case, these keys are then bound to the access token by the authorization server. To summarize the main security recommendations: A large range of threats can be mitigated by protecting the contents of the access token by using a digital signature or a keyed message digest. Consequently, the token integrity protection MUST be applied to prevent the token from being modified, particularly since it contains a reference to the symmetric key or the asymmetric key. If the access token contains the symmetric key (see Section 2.2 of [10] for a description about how symmetric keys can be securely conveyed within the access token) this symmetric key MUST be encrypted by the authorization server with a long-term key shared with the resource server. To deal with token redirect, it is important for the authorization server to include the identity of the intended recipient (the audience), typically a single resource server (or a list of resource Bradley, et al. Expires April 26, 2019 [Page 11] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 servers), in the token. Using a single shared secret with multiple authorization server to simplify key management is NOT RECOMMENDED since the benefit from using the proof-of-possession concept is significantly reduced. Token replay is also not possible since an eavesdropper will also have to obtain the corresponding private key or shared secret that is bound to the access token. Nevertheless, it is good practice to limit the lifetime of the access token and therefore the lifetime of associated key. The authorization server MUST offer confidentiality protection for any interactions with the client. This step is extremely important since the client will obtain the session key from the authorization server for use with a specific access token. Not using confidentiality protection exposes this secret (and the access token) to an eavesdropper thereby making the OAuth 2.0 proof-of-possession security model completely insecure. OAuth 2.0 [2] relies on TLS to offer confidentiality protection and additional protection can be applied using the JWK [5] offered security mechanism, which would add an additional layer of protection on top of TLS for cases where the keying material is conveyed, for example, to a hardware security module. Which version(s) of TLS ought to be implemented will vary over time, and depend on the widespread deployment and known security vulnerabilities at the time of implementation. At the time of this writing, TLS version 1.2 [4] is the most recent version. The client MUST validate the TLS certificate chain when making requests to protected resources, including checking the validity of the certificate. Similarly to the security recommendations for the bearer token specification [16] developers MUST ensure that the ephemeral credentials (i.e., the private key or the session key) is not leaked to third parties. An adversary in possession of the ephemeral credentials bound to the access token will be able to impersonate the client. Be aware that this is a real risk with many smart phone app and Web development environments. Clients can at any time request a new proof-of-possession capable access token. Using a refresh token to regularly request new access tokens that are bound to fresh and unique keys is important. Keeping the lifetime of the access token short allows the authorization server to use shorter key sizes, which translate to a performance benefit for the client and for the resource server. Shorter keys also lead to shorter messages (particularly with asymmetric keying material). Bradley, et al. Expires April 26, 2019 [Page 12] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 When authorization servers bind symmetric keys to access tokens then they SHOULD scope these access tokens to a specific permissions. 6. IANA Considerations 6.1. OAuth Access Token Types This specification registers the following error in the IANA "OAuth Access Token Types" [24] established by [16]. o Name: pop o Change controller: IESG o Specification document(s): [[ this specification ]] 6.2. OAuth Parameters Registration This specification registers the following value in the IANA "OAuth Parameters" registry [24] established by [2]. o Parameter name: cnf_req o Parameter usage location: authorization request, token request o Change controller: IESG o Specification document(s): [[ this specification ]] o Parameter name: cnf o Parameter usage location: authorization response, token response o Change controller: IESG o Specification document(s): [[ this specification ]] o Parameter name: rs_cnf o Parameter usage location: token response o Change controller: IESG o Specification document(s): [[ this specification ]] 6.3. OAuth Extensions Error Registration This specification registers the following error in the IANA "OAuth Extensions Error Registry" [24] established by [2]. o Error name: invalid_token_type o Error usage location: implicit grant error response, token error response o Related protocol extension: token_type parameter o Change controller: IESG o Specification document(s): [[ this specification ]] Bradley, et al. Expires April 26, 2019 [Page 13] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 7. Acknowledgements We would like to thank Chuck Mortimore for his review comments. 8. References 8.1. Normative References [1] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [2] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, . [3] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [4] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008, . [5] Jones, M., "JSON Web Key (JWK)", RFC 7517, DOI 10.17487/RFC7517, May 2015, . [6] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May 2015, . [7] Jones, M., "JSON Web Algorithms (JWA)", RFC 7518, DOI 10.17487/RFC7518, May 2015, . [8] Jones, M. and J. Hildebrand, "JSON Web Encryption (JWE)", RFC 7516, DOI 10.17487/RFC7516, May 2015, . [9] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015, . Bradley, et al. Expires April 26, 2019 [Page 14] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 [10] Jones, M., Bradley, J., and H. Tschofenig, "Proof-of- Possession Key Semantics for JSON Web Tokens (JWTs)", RFC 7800, DOI 10.17487/RFC7800, April 2016, . [11] Jones, M. and N. Sakimura, "JSON Web Key (JWK) Thumbprint", RFC 7638, DOI 10.17487/RFC7638, September 2015, . [12] Jones, M., Seitz, L., Selander, G., Erdtman, S., and H. Tschofenig, "Proof-of-Possession Key Semantics for CBOR Web Tokens (CWTs)", draft-ietf-ace-cwt-proof-of- possession-03 (work in progress), June 2018. [13] Jones, M., Wahlstroem, E., Erdtman, S., and H. Tschofenig, "CBOR Web Token (CWT)", RFC 8392, DOI 10.17487/RFC8392, May 2018, . [14] Schaad, J., "CBOR Object Signing and Encryption (COSE)", RFC 8152, DOI 10.17487/RFC8152, July 2017, . [15] Campbell, B., Bradley, J., and H. Tschofenig, "Resource Indicators for OAuth 2.0", draft-ietf-oauth-resource- indicators-01 (work in progress), October 2018. 8.2. Informative References [16] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", RFC 6750, DOI 10.17487/RFC6750, October 2012, . [17] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, . [18] Campbell, B., Mortimore, C., Jones, M., and Y. Goland, "Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants", RFC 7521, DOI 10.17487/RFC7521, May 2015, . [19] Sakimura, N., Ed., Bradley, J., and N. Agarwal, "Proof Key for Code Exchange by OAuth Public Clients", RFC 7636, DOI 10.17487/RFC7636, September 2015, . Bradley, et al. Expires April 26, 2019 [Page 15] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 [20] Richer, J., Ed., Jones, M., Bradley, J., Machulak, M., and P. Hunt, "OAuth 2.0 Dynamic Client Registration Protocol", RFC 7591, DOI 10.17487/RFC7591, July 2015, . [21] Hunt, P., Richer, J., Mills, W., Mishra, P., and H. Tschofenig, "OAuth 2.0 Proof-of-Possession (PoP) Security Architecture", draft-ietf-oauth-pop-architecture-08 (work in progress), July 2016. [22] Richer, J., Ed., "OAuth 2.0 Token Introspection", RFC 7662, DOI 10.17487/RFC7662, October 2015, . [23] Seitz, L., Selander, G., Wahlstroem, E., Erdtman, S., and H. Tschofenig, "Authentication and Authorization for Constrained Environments (ACE) using the OAuth 2.0 Framework (ACE-OAuth)", draft-ietf-ace-oauth-authz-16 (work in progress), October 2018. [24] IANA, "OAuth Parameters", October 2018. [25] IANA, "JSON Web Token Claims", June 2018. Authors' Addresses John Bradley Ping Identity Email: ve7jtb@ve7jtb.com URI: http://www.thread-safe.com/ Phil Hunt Oracle Corporation Email: phil.hunt@yahoo.com URI: http://www.indepdentid.com Michael B. Jones Microsoft Email: mbj@microsoft.com URI: http://self-issued.info/ Bradley, et al. Expires April 26, 2019 [Page 16] Internet-Draft OAuth 2.0 PoP: AS-Client Key Distribution October 2018 Hannes Tschofenig Arm Ltd. Absam 6067 Austria Email: Hannes.Tschofenig@gmx.net URI: http://www.tschofenig.priv.at Meszaros Mihaly NIIF Institute Hungary Email: misi@niif.hu Bradley, et al. Expires April 26, 2019 [Page 17]