TOC 
OAuth Working GroupM. Jones
Internet-DraftMicrosoft
Intended status: Standards TrackJ. Bradley
Expires: November 29, 2013Ping Identity
 N. Sakimura
 NRI
 May 28, 2013


JSON Web Token (JWT)
draft-ietf-oauth-json-web-token-08

Abstract

JSON Web Token (JWT) is a compact URL-safe means of representing claims to be transferred between two parties. The claims in a JWT are encoded as a JavaScript Object Notation (JSON) object that is used as the payload of a JSON Web Signature (JWS) structure or as the plaintext of a JSON Web Encryption (JWE) structure, enabling the claims to be digitally signed or MACed and/or encrypted.

The suggested pronunciation of JWT is the same as the English word "jot".

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on November 29, 2013.

Copyright Notice

Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.



Table of Contents

1.  Introduction
    1.1.  Notational Conventions
2.  Terminology
3.  JSON Web Token (JWT) Overview
    3.1.  Example JWT
4.  JWT Claims
    4.1.  Reserved Claim Names
        4.1.1.  "iss" (Issuer) Claim
        4.1.2.  "sub" (Subject) Claim
        4.1.3.  "aud" (Audience) Claim
        4.1.4.  "exp" (Expiration Time) Claim
        4.1.5.  "nbf" (Not Before) Claim
        4.1.6.  "iat" (Issued At) Claim
        4.1.7.  "jti" (JWT ID) Claim
        4.1.8.  "typ" (Type) Claim
    4.2.  Public Claim Names
    4.3.  Private Claim Names
5.  JWT Header
    5.1.  "typ" (Type) Header Parameter
    5.2.  "cty" (Content Type) Header Parameter
6.  Plaintext JWTs
    6.1.  Example Plaintext JWT
7.  Rules for Creating and Validating a JWT
    7.1.  String Comparison Rules
8.  Cryptographic Algorithms
9.  IANA Considerations
    9.1.  JSON Web Token Claims Registry
        9.1.1.  Registration Template
        9.1.2.  Initial Registry Contents
    9.2.  Sub-Namespace Registration of urn:ietf:params:oauth:token-type:jwt
        9.2.1.  Registry Contents
    9.3.  JSON Web Signature and Encryption Type Values Registration
        9.3.1.  Registry Contents
    9.4.  Media Type Registration
        9.4.1.  Registry Contents
10.  Security Considerations
11.  References
    11.1.  Normative References
    11.2.  Informative References
Appendix A.  Example Encrypted JWT
Appendix B.  Relationship of JWTs to SAML Assertions
Appendix C.  Relationship of JWTs to Simple Web Tokens (SWTs)
Appendix D.  Acknowledgements
Appendix E.  Document History
§  Authors' Addresses




 TOC 

1.  Introduction

JSON Web Token (JWT) is a compact claims representation format intended for space constrained environments such as HTTP Authorization headers and URI query parameters. JWTs encode claims to be transmitted as a JavaScript Object Notation (JSON) [RFC4627] (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) object that is used as the payload of a JSON Web Signature (JWS) [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) structure or as the plaintext of a JSON Web Encryption (JWE) [JWE] (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) structure, enabling the claims to be digitally signed or MACed and/or encrypted. JWTs are always represented using the JWS Compact Serialization or the JWE Compact Serialization.

The suggested pronunciation of JWT is the same as the English word "jot".



 TOC 

1.1.  Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in Key words for use in RFCs to Indicate Requirement Levels [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).



 TOC 

2.  Terminology

JSON Web Token (JWT)
A string representing a set of claims as a JSON object that is encoded in a JWS or JWE, enabling the claims to be digitally signed or MACed and/or encrypted.
Base64url Encoding
The URL- and filename-safe Base64 encoding described in RFC 4648 (Josefsson, S., “The Base16, Base32, and Base64 Data Encodings,” October 2006.) [RFC4648], Section 5, with the (non URL-safe) '=' padding characters omitted, as permitted by Section 3.2. (See Appendix C of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) for notes on implementing base64url encoding without padding.)
JSON Text Object
A UTF-8 [RFC3629] (Yergeau, F., “UTF-8, a transformation format of ISO 10646,” November 2003.) encoded text string representing a JSON object; the syntax of JSON objects is defined in Section 2.2 of [RFC4627] (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.).
JWT Header
A JSON Text Object that describes the cryptographic operations applied to the JWT. When the JWT is digitally signed or MACed, the JWT Header is a JWS Header. When the JWT is encrypted, the JWT Header is a JWE Header.
Header Parameter Name
The name of a member of the JWT Header.
Header Parameter Value
The value of a member of the JWT Header.
JWT Claims Set
A JSON Text Object that contains the Claims conveyed by the JWT.
Claim
A piece of information asserted about a subject. A Claim is represented as a name/value pair consisting of a Claim Name and a Claim Value.
Claim Name
The name portion of a Claim representation. A Claim Name is always a string.
Claim Value
The value portion of a Claim representation. A Claim Value can be any JSON value.
Encoded JWT Header
Base64url encoding of the JWT Header.
Nested JWT
A JWT in which nested signing and/or encryption are employed. In nested JWTs, a JWT is used as the payload or plaintext value of an enclosing JWS or JWE structure, respectively.
Plaintext JWT
A JWT whose Claims are not integrity protected or encrypted.
Collision Resistant Namespace
A namespace that allows names to be allocated in a manner such that they are highly unlikely to collide with other names. For instance, collision resistance can be achieved through administrative delegation of portions of the namespace or through use of collision-resistant name allocation functions. Examples of Collision Resistant Namespaces include: Domain Names, Object Identifiers (OIDs) as defined in the ITU-T X.660 and X.670 Recommendation series, and Universally Unique IDentifiers (UUIDs) [RFC4122] (Leach, P., Mealling, M., and R. Salz, “A Universally Unique IDentifier (UUID) URN Namespace,” July 2005.). When using an administratively delegated namespace, the definer of a name needs to take reasonable precautions to ensure they are in control of the portion of the namespace they use to define the name.
StringOrURI
A JSON string value, with the additional requirement that while arbitrary string values MAY be used, any value containing a ":" character MUST be a URI [RFC3986] (Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” January 2005.). StringOrURI values are compared as case-sensitive strings with no transformations or canonicalizations applied.
IntDate
A JSON numeric value representing the number of seconds from 1970-01-01T0:0:0Z UTC until the specified UTC date/time. See RFC 3339 (Klyne, G., Ed. and C. Newman, “Date and Time on the Internet: Timestamps,” July 2002.) [RFC3339] for details regarding date/times in general and UTC in particular.



 TOC 

3.  JSON Web Token (JWT) Overview

JWTs represent a set of claims as a JSON object that is encoded in a JWS and/or JWE structure. This JSON object is the JWT Claims Set. As per RFC 4627 (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) [RFC4627] Section 2.2, the JSON object consists of zero or more name/value pairs (or members), where the names are strings and the values are arbitrary JSON values. These members are the claims represented by the JWT.

The member names within the JWT Claims Set are referred to as Claim Names. The corresponding values are referred to as Claim Values.

The contents of the JWT Header describe the cryptographic operations applied to the JWT Claims Set. If the JWT Header is a JWS Header, the JWT is represented as a JWS, and the claims are digitally signed or MACed, with the JWT Claims Set being the JWS Payload. If the JWT Header is a JWE Header, the JWT is represented as a JWE, and the claims are encrypted, with the JWT Claims Set being the input Plaintext. A JWT may be enclosed in another JWE or JWS structure to create a Nested JWT, enabling nested signing and encryption to be performed.

A JWT is represented as a sequence of URL-safe parts separated by period ('.') characters. Each part contains a base64url encoded value. The number of parts in the JWT is dependent upon the representation of the resulting JWS or JWE object using the JWS Compact Serialization or the JWE Compact Serialization.



 TOC 

3.1.  Example JWT

The following example JWT Header declares that the encoded object is a JSON Web Token (JWT) and the JWT is MACed using the HMAC SHA-256 algorithm:

  {"typ":"JWT",
   "alg":"HS256"}

Base64url encoding the octets of the UTF-8 representation of the JWT Header yields this Encoded JWS Header value, which is used as the Encoded JWT Header:

  eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9

The following is an example of a JWT Claims Set:

  {"iss":"joe",
   "exp":1300819380,
   "http://example.com/is_root":true}

Base64url encoding the octets of the UTF-8 representation of the JSON Claims Set yields this Encoded JWS Payload (with line breaks for display purposes only):

  eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly
  9leGFtcGxlLmNvbS9pc19yb290Ijp0cnVlfQ

Signing the Encoded JWS Header and Encoded JWS Payload with the HMAC SHA-256 algorithm and base64url encoding the signature in the manner specified in [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.), yields this Encoded JWS Signature:

  dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk

Concatenating these parts in this order with period ('.') characters between the parts yields this complete JWT (with line breaks for display purposes only):

  eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9
  .
  eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
  cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
  .
  dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk

This computation is illustrated in more detail in Appendix A.1 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.). See Appendix A (Example Encrypted JWT) for an example of an encrypted JWT.



 TOC 

4.  JWT Claims

The JWT Claims Set represents a JSON object whose members are the claims conveyed by the JWT. The Claim Names within a JWT Claims Set MUST be unique; JWTs with duplicate Claim Names MUST be rejected.

The set of claims that a JWT must contain to be considered valid is context-dependent and is outside the scope of this specification. Specific applications of JWTs will require implementations to understand and process some claims in particular ways. However, in the absence of such requirements, all claims that are not understood by implementations SHOULD be ignored.

There are three classes of JWT Claim Names: Reserved Claim Names, Public Claim Names, and Private Claim Names.



 TOC 

4.1.  Reserved Claim Names

The following Claim Names are reserved. None of the claims defined below are intended to be mandatory to use, but rather, provide a starting point for a set of useful, interoperable claims. All the names are short because a core goal of JWTs is for the representation to be compact. Additional reserved Claim Names can be defined via the IANA JSON Web Token Claims registry Section 9.1 (JSON Web Token Claims Registry).



 TOC 

4.1.1.  "iss" (Issuer) Claim

The iss (issuer) claim identifies the principal that issued the JWT. The processing of this claim is generally application specific. The iss value is a case sensitive string containing a StringOrURI value. Use of this claim is OPTIONAL.



 TOC 

4.1.2.  "sub" (Subject) Claim

The sub (subject) claim identifies the principal that is the subject of the JWT. The Claims in a JWT are normally statements about the subject. The processing of this claim is generally application specific. The sub value is a case sensitive string containing a StringOrURI value. Use of this claim is OPTIONAL.



 TOC 

4.1.3.  "aud" (Audience) Claim

The aud (audience) claim identifies the audiences that the JWT is intended for. Each principal intended to process the JWT MUST identify itself with a value in audience claim. If the principal processing the claim does not identify itself with a value in the aud claim, then the JWT MUST be rejected. In the general case, the aud value is an array of case sensitive strings, each containing a StringOrURI value. In the special case when the JWT has one audience, the aud value MAY be a single case sensitive string containing a StringOrURI value. The interpretation of audience values is generally application specific. Use of this claim is OPTIONAL.



 TOC 

4.1.4.  "exp" (Expiration Time) Claim

The exp (expiration time) claim identifies the expiration time on or after which the JWT MUST NOT be accepted for processing. The processing of the exp claim requires that the current date/time MUST be before the expiration date/time listed in the exp claim. Implementers MAY provide for some small leeway, usually no more than a few minutes, to account for clock skew. Its value MUST be a number containing an IntDate value. Use of this claim is OPTIONAL.



 TOC 

4.1.5.  "nbf" (Not Before) Claim

The nbf (not before) claim identifies the time before which the JWT MUST NOT be accepted for processing. The processing of the nbf claim requires that the current date/time MUST be after or equal to the not-before date/time listed in the nbf claim. Implementers MAY provide for some small leeway, usually no more than a few minutes, to account for clock skew. Its value MUST be a number containing an IntDate value. Use of this claim is OPTIONAL.



 TOC 

4.1.6.  "iat" (Issued At) Claim

The iat (issued at) claim identifies the time at which the JWT was issued. This claim can be used to determine the age of the JWT. Its value MUST be a number containing an IntDate value. Use of this claim is OPTIONAL.



 TOC 

4.1.7.  "jti" (JWT ID) Claim

The jti (JWT ID) claim provides a unique identifier for the JWT. The identifier value MUST be assigned in a manner that ensures that there is a negligible probability that the same value will be accidentally assigned to a different data object. The jti claim can be used to prevent the JWT from being replayed. The jti value is a case sensitive string. Use of this claim is OPTIONAL.



 TOC 

4.1.8.  "typ" (Type) Claim

The typ (type) claim is used to declare a type for the contents of this JWT Claims Set. The typ value is a case sensitive string. Use of this claim is OPTIONAL.

The values used for the typ claim come from the same value space as the typ header parameter, with the same rules applying.



 TOC 

4.2.  Public Claim Names

Claim Names can be defined at will by those using JWTs. However, in order to prevent collisions, any new Claim Name SHOULD either be registered in the IANA JSON Web Token Claims registry Section 9.1 (JSON Web Token Claims Registry) or be a Public Name: a value that contains a Collision Resistant Namespace. In each case, the definer of the name or value needs to take reasonable precautions to make sure they are in control of the part of the namespace they use to define the Claim Name.



 TOC 

4.3.  Private Claim Names

A producer and consumer of a JWT may agree to use Claim Names that are Private Names: names that are not Reserved Names Section 4.1 (Reserved Claim Names) or Public Names Section 4.2 (Public Claim Names). Unlike Public Names, Private Names are subject to collision and should be used with caution.



 TOC 

5.  JWT Header

The members of the JSON object represented by the JWT Header describe the cryptographic operations applied to the JWT and optionally, additional properties of the JWT. The member names within the JWT Header are referred to as Header Parameter Names. These names MUST be unique; JWTs with duplicate Header Parameter Names MUST be rejected. The corresponding values are referred to as Header Parameter Values.

JWS Header Parameters are defined by [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.). JWE Header Parameters are defined by [JWE] (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.). This specification further specifies the use of the following header parameter in both the cases where the JWT is a JWS and where it is a JWE.



 TOC 

5.1.  "typ" (Type) Header Parameter

The typ (type) header parameter is used to declare the type of this object. If present, it is RECOMMENDED that its value be either JWT or urn:ietf:params:oauth:token-type:jwt to indicate that this object is a JWT. The typ value is a case sensitive string. Use of this header parameter is OPTIONAL.



 TOC 

5.2.  "cty" (Content Type) Header Parameter

The cty (content type) header parameter is used to declare structural information about the JWT. Its value MUST be a string.

In the normal case where nested signing or encryption operations are not employed, the use of this header parameter is NOT RECOMMENDED. In the case that nested signing or encryption is employed, the use of this header parameter is REQUIRED; in this case, the value MUST be JWT, to indicate that a Nested JWT is carried in this JWT.

The values used for the cty header parameter come from the same value space as the typ header parameter, with the same rules applying.



 TOC 

6.  Plaintext JWTs

To support use cases where the JWT content is secured by a means other than a signature and/or encryption contained within the JWT (such as a signature on a data structure containing the JWT), JWTs MAY also be created without a signature or encryption. A plaintext JWT is a JWS using the none JWS alg header parameter value defined in JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.); it is a JWS with the empty string for its JWS Signature value.



 TOC 

6.1.  Example Plaintext JWT

The following example JWT Header declares that the encoded object is a Plaintext JWT:

  {"alg":"none"}

Base64url encoding the octets of the UTF-8 representation of the JWT Header yields this Encoded JWT Header:

  eyJhbGciOiJub25lIn0

The following is an example of a JWT Claims Set:

  {"iss":"joe",
   "exp":1300819380,
   "http://example.com/is_root":true}

Base64url encoding the octets of the UTF-8 representation of the JSON Claims Set yields this Encoded JWS Payload (with line breaks for display purposes only):

  eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
  cGxlLmNvbS9pc19yb290Ijp0cnVlfQ

The Encoded JWS Signature is the empty string.

Concatenating these parts in this order with period ('.') characters between the parts yields this complete JWT (with line breaks for display purposes only):

  eyJhbGciOiJub25lIn0
  .
  eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
  cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
  .


 TOC 

7.  Rules for Creating and Validating a JWT

To create a JWT, one MUST perform these steps. The order of the steps is not significant in cases where there are no dependencies between the inputs and outputs of the steps.

  1. Create a JWT Claims Set containing the desired claims. Note that white space is explicitly allowed in the representation and no canonicalization is performed before encoding.
  2. Let the Message be the octets of the UTF-8 representation of the JWT Claims Set.
  3. Create a JWT Header containing the desired set of header parameters. The JWT MUST conform to either the [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) or [JWE] (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) specifications. Note that white space is explicitly allowed in the representation and no canonicalization is performed before encoding.
  4. Base64url encode the octets of the UTF-8 representation of the JWT Header. Let this be the Encoded JWT Header.
  5. Depending upon whether the JWT is a JWS or JWE, there are two cases:
  6. If a nested signing or encryption operation will be performed, let the Message be the JWS or JWE, and return to Step 3, using a cty (content type) value of JWT in the new JWT Header created in that step.
  7. Otherwise, let the resulting JWT be the JWS or JWE.

When validating a JWT the following steps MUST be taken. The order of the steps is not significant in cases where there are no dependencies between the inputs and outputs of the steps. If any of the listed steps fails then the JWT MUST be rejected for processing.

  1. The JWT MUST contain at least one period ('.') character.
  2. Let the Encoded JWT Header be the portion of the JWT before the first period ('.') character.
  3. The Encoded JWT Header MUST be successfully base64url decoded following the restriction given in this specification that no padding characters have been used.
  4. The resulting JWT Header MUST be completely valid JSON syntax conforming to RFC 4627 (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) [RFC4627].
  5. The resulting JWT Header MUST be validated to only include parameters and values whose syntax and semantics are both understood and supported or that are specified as being ignored when not understood.
  6. Determine whether the JWT is a JWS or a JWE by examining the alg (algorithm) header value and optionally, the enc (encryption method) header value, if present.
  7. Depending upon whether the JWT is a JWS or JWE, there are two cases:
  8. If the JWT Header contains a cty (content type) value of JWT, then the Message is a JWT that was the subject of nested signing or encryption operations. In this case, return to Step 1, using the Message as the JWT.
  9. Otherwise, let the JWT Claims Set be the Message.
  10. The JWT Claims Set MUST be completely valid JSON syntax conforming to RFC 4627 (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) [RFC4627].



 TOC 

7.1.  String Comparison Rules

Processing a JWT inevitably requires comparing known strings to values in JSON objects. For example, in checking what the algorithm is, the Unicode string encoding alg will be checked against the member names in the JWT Header to see if there is a matching Header Parameter Name.

Comparisons between JSON strings and other Unicode strings MUST be performed by comparing Unicode code points without normalization as specified in the String Comparison Rules in Section 5.3 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.).



 TOC 

8.  Cryptographic Algorithms

JWTs use JSON Web Signature (JWS) [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) and JSON Web Encryption (JWE) [JWE] (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) to sign and/or encrypt the contents of the JWT.

Of the JWA signing algorithms, only HMAC SHA-256 (HS256) and none MUST be implemented by conforming JWT implementations. It is RECOMMENDED that implementations also support RSASSA-PKCS1-V1_5 with the SHA-256 hash algorithm (RS256) and ECDSA using the P-256 curve and the SHA-256 hash algorithm (ES256). Support for other algorithms and key sizes is OPTIONAL.

If an implementation provides encryption capabilities, of the JWA encryption algorithms, only RSAES-PKCS1-V1_5 with 2048 bit keys (RSA1_5), AES Key Wrap with 128 and 256 bit keys (A128KW and A256KW), and the composite authenticated encryption algorithm using AES CBC and HMAC SHA-2 (A128CBC-HS256 and A256CBC-HS512) MUST be implemented by conforming implementations. It is RECOMMENDED that implementations also support using ECDH-ES to agree upon a key used to wrap the Content Encryption Key (ECDH-ES+A128KW and ECDH-ES+A256KW) and AES in Galois/Counter Mode (GCM) with 128 bit and 256 bit keys (A128GCM and A256GCM). Support for other algorithms and key sizes is OPTIONAL.



 TOC 

9.  IANA Considerations



 TOC 

9.1.  JSON Web Token Claims Registry

This specification establishes the IANA JSON Web Token Claims registry for reserved JWT Claim Names. The registry records the reserved Claim Name and a reference to the specification that defines it. This specification registers the Claim Names defined in Section 4.1 (Reserved Claim Names).

Values are registered with a Specification Required [RFC5226] (Narten, T. and H. Alvestrand, “Guidelines for Writing an IANA Considerations Section in RFCs,” May 2008.) after a two-week review period on the [TBD]@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published.

Registration requests must be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for access token type: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: claims-reg-review. ]]

Within the review period, the Designated Expert(s) will either approve or deny the registration request, communicating this decision to the review list and IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful.

IANA must only accept registry updates from the Designated Expert(s) and should direct all requests for registration to the review mailing list.



 TOC 

9.1.1.  Registration Template

Claim Name:
The name requested (e.g., "example"). This name is case sensitive. Names that match other registered names in a case insensitive manner SHOULD NOT be accepted.
Change Controller:
For Standards Track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, email address, home page URI) may also be included.
Specification Document(s):
Reference to the document(s) that specify the parameter, preferably including URI(s) that can be used to retrieve copies of the document(s). An indication of the relevant sections may also be included but is not required.



 TOC 

9.1.2.  Initial Registry Contents



 TOC 

9.2.  Sub-Namespace Registration of urn:ietf:params:oauth:token-type:jwt



 TOC 

9.2.1.  Registry Contents

This specification registers the value token-type:jwt in the IANA urn:ietf:params:oauth registry established in An IETF URN Sub-Namespace for OAuth (Campbell, B. and H. Tschofenig, “An IETF URN Sub-Namespace for OAuth,” October 2012.) [RFC6755].



 TOC 

9.3.  JSON Web Signature and Encryption Type Values Registration



 TOC 

9.3.1.  Registry Contents

This specification registers the JWT type value in the IANA JSON Web Signature and Encryption Type Values registry [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.):



 TOC 

9.4.  Media Type Registration



 TOC 

9.4.1.  Registry Contents

This specification registers the application/jwt Media Type [RFC2046] (Freed, N. and N. Borenstein, “Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types,” November 1996.) in the MIME Media Type registry [RFC4288] (Freed, N. and J. Klensin, “Media Type Specifications and Registration Procedures,” December 2005.) to indicate that the content is a JWT.



 TOC 

10.  Security Considerations

All of the security issues faced by any cryptographic application must be faced by a JWT/JWS/JWE/JWK agent. Among these issues are protecting the user's private and symmetric keys, preventing various attacks, and helping the user avoid mistakes such as inadvertently encrypting a message for the wrong recipient. The entire list of security considerations is beyond the scope of this document.

All the security considerations in the JWS specification also apply to JWT, as do the JWE security considerations when encryption is employed. In particular, the JWS JSON Security Considerations and Unicode Comparison Security Considerations apply equally to the JWT Claims Set in the same manner that they do to the JWS Header.

While syntactically, the signing and encryption operations for Nested JWTs may be applied in any order, normally senders should sign the message and then encrypt the result (thus encrypting the signature). This prevents attacks in which the signature is stripped, leaving just an encrypted message, as well as providing privacy for the signer. Furthermore, signatures over encrypted text are not considered valid in many jurisdictions.

Note that potential concerns about security issues related to the order of signing and encryption operations are already addressed by the underlying JWS and JWE specifications; in particular, because JWE only supports the use of authenticated encryption algorithms, cryptographic concerns about the potential need to sign after encryption that apply in many contexts do not apply to this specification.



 TOC 

11.  References



 TOC 

11.1. Normative References

[JWA] Jones, M., “JSON Web Algorithms (JWA),” draft-ietf-jose-json-web-algorithms (work in progress), May 2013 (HTML).
[JWE] Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” draft-ietf-jose-json-web-encryption (work in progress), May 2013 (HTML).
[JWS] Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” draft-ietf-jose-json-web-signature (work in progress), May 2013 (HTML).
[RFC2046] Freed, N. and N. Borenstein, “Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types,” RFC 2046, November 1996 (TXT).
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).
[RFC3339] Klyne, G., Ed. and C. Newman, “Date and Time on the Internet: Timestamps,” RFC 3339, July 2002 (TXT, HTML, XML).
[RFC3629] Yergeau, F., “UTF-8, a transformation format of ISO 10646,” STD 63, RFC 3629, November 2003 (TXT).
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” STD 66, RFC 3986, January 2005 (TXT, HTML, XML).
[RFC4288] Freed, N. and J. Klensin, “Media Type Specifications and Registration Procedures,” RFC 4288, December 2005 (TXT).
[RFC4627] Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” RFC 4627, July 2006 (TXT).
[RFC4648] Josefsson, S., “The Base16, Base32, and Base64 Data Encodings,” RFC 4648, October 2006 (TXT).
[RFC5226] Narten, T. and H. Alvestrand, “Guidelines for Writing an IANA Considerations Section in RFCs,” BCP 26, RFC 5226, May 2008 (TXT).
[RFC6755] Campbell, B. and H. Tschofenig, “An IETF URN Sub-Namespace for OAuth,” RFC 6755, October 2012 (TXT).


 TOC 

11.2. Informative References

[CanvasApp] Facebook, “Canvas Applications,” 2010.
[JSS] Bradley, J. and N. Sakimura (editor), “JSON Simple Sign,” September 2010.
[MagicSignatures] Panzer (editor), J., Laurie, B., and D. Balfanz, “Magic Signatures,” January 2011.
[OASIS.saml-core-2.0-os] Cantor, S., Kemp, J., Philpott, R., and E. Maler, “Assertions and Protocol for the OASIS Security Assertion Markup Language (SAML) V2.0,” OASIS Standard saml-core-2.0-os, March 2005.
[RFC3275] Eastlake, D., Reagle, J., and D. Solo, “(Extensible Markup Language) XML-Signature Syntax and Processing,” RFC 3275, March 2002 (TXT).
[RFC4122] Leach, P., Mealling, M., and R. Salz, “A Universally Unique IDentifier (UUID) URN Namespace,” RFC 4122, July 2005 (TXT, HTML, XML).
[SWT] Hardt, D. and Y. Goland, “Simple Web Token (SWT),” Version 0.9.5.1, November 2009.
[W3C.CR-xml11-20021015] Cowan, J., “Extensible Markup Language (XML) 1.1,” W3C CR CR-xml11-20021015, October 2002.
[W3C.REC-xml-c14n-20010315] Boyer, J., “Canonical XML Version 1.0,” World Wide Web Consortium Recommendation REC-xml-c14n-20010315, March 2001 (HTML).


 TOC 

Appendix A.  Example Encrypted JWT

This example encrypts the same claims as used in Section 3.1 (Example JWT) to the recipient using RSAES-PKCS1-V1_5 and AES_128_CBC_HMAC_SHA_256.

The following example JWE Header (with line breaks for display purposes only) declares that:

  {"alg":"RSA1_5","enc":"A128CBC-HS256"}

Other than using the octets of the UTF-8 representation of the JSON Claims Set from Section 3.1 (Example JWT) as the plaintext value, the computation of this JWT is identical to the computation of the JWE in Appendix A.2 of [JWE] (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.), including the keys used.

The final result in this example (with line breaks for display purposes only) is:

  eyJhbGciOiJSU0ExXzUiLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0.
  QR1Owv2ug2WyPBnbQrRARTeEk9kDO2w8qDcjiHnSJflSdv1iNqhWXaKH4MqAkQtM
  oNfABIPJaZm0HaA415sv3aeuBWnD8J-Ui7Ah6cWafs3ZwwFKDFUUsWHSK-IPKxLG
  TkND09XyjORj_CHAgOPJ-Sd8ONQRnJvWn_hXV1BNMHzUjPyYwEsRhDhzjAD26ima
  sOTsgruobpYGoQcXUwFDn7moXPRfDE8-NoQX7N7ZYMmpUDkR-Cx9obNGwJQ3nM52
  YCitxoQVPzjbl7WBuB7AohdBoZOdZ24WlN1lVIeh8v1K4krB8xgKvRU8kgFrEn_a
  1rZgN5TiysnmzTROF869lQ.
  AxY8DCtDaGlsbGljb3RoZQ.
  MKOle7UQrG6nSxTLX6Mqwt0orbHvAKeWnDYvpIAeZ72deHxz3roJDXQyhxx0wKaM
  HDjUEOKIwrtkHthpqEanSBNYHZgmNOV7sln1Eu9g3J8.
  fiK51VwhsxJ-siBMR-YFiA


 TOC 

Appendix B.  Relationship of JWTs to SAML Assertions

SAML 2.0 (Cantor, S., Kemp, J., Philpott, R., and E. Maler, “Assertions and Protocol for the OASIS Security Assertion Markup Language (SAML) V2.0,” March 2005.) [OASIS.saml‑core‑2.0‑os] provides a standard for creating security tokens with greater expressivity and more security options than supported by JWTs. However, the cost of this flexibility and expressiveness is both size and complexity. SAML's use of XML [W3C.CR‑xml11‑20021015] (Cowan, J., “Extensible Markup Language (XML) 1.1,” October 2002.) and XML DSIG [RFC3275] (Eastlake, D., Reagle, J., and D. Solo, “(Extensible Markup Language) XML-Signature Syntax and Processing,” March 2002.) contributes to the size of SAML assertions; its use of XML and especially XML Canonicalization [W3C.REC‑xml‑c14n‑20010315] (Boyer, J., “Canonical XML Version 1.0,” March 2001.) contributes to their complexity.

JWTs are intended to provide a simple security token format that is small enough to fit into HTTP headers and query arguments in URIs. It does this by supporting a much simpler token model than SAML and using the JSON (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) [RFC4627] object encoding syntax. It also supports securing tokens using Message Authentication Codes (MACs) and digital signatures using a smaller (and less flexible) format than XML DSIG.

Therefore, while JWTs can do some of the things SAML assertions do, JWTs are not intended as a full replacement for SAML assertions, but rather as a token format to be used when ease of implementation or compactness are considerations.

SAML Assertions are always statements made by an entity about a subject. JWTs are often used in the same manner, with the entity making the statements being represented by the iss (issuer) claim, and the subject being represented by the sub (subject) claim. However, with these claims being optional, other uses of the JWT format are also permitted.



 TOC 

Appendix C.  Relationship of JWTs to Simple Web Tokens (SWTs)

Both JWTs and Simple Web Tokens SWT (Hardt, D. and Y. Goland, “Simple Web Token (SWT),” November 2009.) [SWT], at their core, enable sets of claims to be communicated between applications. For SWTs, both the claim names and claim values are strings. For JWTs, while claim names are strings, claim values can be any JSON type. Both token types offer cryptographic protection of their content: SWTs with HMAC SHA-256 and JWTs with a choice of algorithms, including signature, MAC, and encryption algorithms.



 TOC 

Appendix D.  Acknowledgements

The authors acknowledge that the design of JWTs was intentionally influenced by the design and simplicity of Simple Web Tokens (Hardt, D. and Y. Goland, “Simple Web Token (SWT),” November 2009.) [SWT] and ideas for JSON tokens that Dick Hardt discussed within the OpenID community.

Solutions for signing JSON content were previously explored by Magic Signatures (Panzer (editor), J., Laurie, B., and D. Balfanz, “Magic Signatures,” January 2011.) [MagicSignatures], JSON Simple Sign (Bradley, J. and N. Sakimura (editor), “JSON Simple Sign,” September 2010.) [JSS], and Canvas Applications (Facebook, “Canvas Applications,” 2010.) [CanvasApp], all of which influenced this draft.

This specification is the work of the OAuth Working Group, which includes dozens of active and dedicated participants. In particular, the following individuals contributed ideas, feedback, and wording that influenced this specification:

Dirk Balfanz, Richard Barnes, Brian Campbell, Breno de Medeiros, Dick Hardt, Joe Hildebrand, Jeff Hodges, Edmund Jay, Yaron Y. Goland, Ben Laurie, James Manger, Prateek Mishra, Tony Nadalin, Axel Nennker, John Panzer, Emmanuel Raviart, David Recordon, Eric Rescorla, Jim Schaad, Paul Tarjan, Hannes Tschofenig, and Sean Turner.

Hannes Tschofenig and Derek Atkins chaired the OAuth working group and Sean Turner and Stephen Farrell served as Security area directors during the creation of this specification.



 TOC 

Appendix E.  Document History

[[ to be removed by the RFC editor before publication as an RFC ]]

-08

-07

-06

-05

-04

-03

-02

-01

-00



 TOC 

Authors' Addresses

  Michael B. Jones
  Microsoft
Email:  mbj@microsoft.com
URI:  http://self-issued.info/
  
  John Bradley
  Ping Identity
Email:  ve7jtb@ve7jtb.com
  
  Nat Sakimura
  Nomura Research Institute
Email:  n-sakimura@nri.co.jp