TOC 
JOSE Working GroupM. Jones
Internet-DraftMicrosoft
Intended status: Standards TrackN. Sakimura
Expires: August 23, 2015NRI
 February 19, 2015


JSON Web Key (JWK) Thumbprint
draft-ietf-jose-jwk-thumbprint-02

Abstract

This specification defines a means of computing a thumbprint value (a.k.a. digest) of JSON Web Key (JWK) objects analogous to the x5t (X.509 Certificate SHA-1 Thumbprint) value defined for X.509 certificate objects.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on August 23, 2015.

Copyright Notice

Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.



Table of Contents

1.  Introduction
    1.1.  Notational Conventions
2.  Terminology
3.  JSON Web Key (JWK) Thumbprint
    3.1.  Example JWK Thumbprint Computation
    3.2.  JWK Members Used in the Thumbprint Computation
        3.2.1.  JWK Thumbprint of a Private Key
        3.2.2.  Why Not Include Optional Members?
    3.3.  Order and Representation of Members in Hash Input
    3.4.  JWK Thumbprints of Keys Not in JWK Format
4.  Practical JSON and Unicode Considerations
5.  IANA Considerations
6.  Security Considerations
7.  References
    7.1.  Normative References
    7.2.  Informative References
Appendix A.  Acknowledgements
Appendix B.  Document History
§  Authors' Addresses




 TOC 

1.  Introduction

This specification defines a means of computing a thumbprint value (a.k.a. digest) of JSON Web Key (JWK) [JWK] (Jones, M., “JSON Web Key (JWK),” January 2015.) objects analogous to the x5t (X.509 Certificate SHA-1 Thumbprint) value defined for X.509 certificate objects. This value can be used for identifying or selecting the key that is the subject of the thumbprint, for instance, by using the base64url encoded JWK Thumbprint value as a kid (key ID) value.



 TOC 

1.1.  Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in Key words for use in RFCs to Indicate Requirement Levels [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).



 TOC 

2.  Terminology

This specification uses the same terminology as the JSON Web Key (JWK) [JWK] (Jones, M., “JSON Web Key (JWK),” January 2015.), JSON Web Signature (JWS) [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” January 2015.), JSON Web Encryption (JWE) [JWE] (Jones, M. and J. Hildebrand, “JSON Web Encryption (JWE),” January 2015.), and JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” January 2015.) specifications.

This term is defined by this specification:

JWK Thumbprint
The digest value for a key that is the subject of this specification.



 TOC 

3.  JSON Web Key (JWK) Thumbprint

The thumbprint of a JSON Web Key (JWK) is computed as follows:

  1. Construct a JSON object [RFC7159] (Bray, T., “The JavaScript Object Notation (JSON) Data Interchange Format,” March 2014.) containing only the REQUIRED members of a JWK representing the key and with no white space or line breaks before or after any syntactic elements and with the REQUIRED members ordered lexicographically by the Unicode [UNICODE] (The Unicode Consortium, “The Unicode Standard,” 1991-.) code points of the member names. (This JSON object is itself a legal JWK representation of the key.)
  2. Hash the octets of the UTF-8 representation of this JSON object with a cryptographic hash function H. For example, SHA-256 [SHS] (National Institute of Standards and Technology, “Secure Hash Standard (SHS),” March 2012.) might be used as H.

The resulting value is the JWK Thumbprint with H of the JWK. The details of this computation are further described in subsequent sections.



 TOC 

3.1.  Example JWK Thumbprint Computation

This section demonstrates the JWK Thumbprint computation for the JWK below (with long lines broken for display purposes only):

  {
   "kty": "RSA",
   "n": "0vx7agoebGcQSuuPiLJXZptN9nndrQmbXEps2aiAFbWhM78LhWx4cbbfAAt
         VT86zwu1RK7aPFFxuhDR1L6tSoc_BJECPebWKRXjBZCiFV4n3oknjhMstn6
         4tZ_2W-5JsGY4Hc5n9yBXArwl93lqt7_RN5w6Cf0h4QyQ5v-65YGjQR0_FD
         W2QvzqY368QQMicAtaSqzs8KJZgnYb9c7d0zgdAZHzu6qMQvRL5hajrn1n9
         1CbOpbISD08qNLyrdkt-bFTWhAI4vMQFh6WeZu0fM4lFd2NcRwr3XPksINH
         aQ-G_xBniIqbw0Ls1jF44-csFCur-kEgU8awapJzKnqDKgw",
   "e": "AQAB",
   "alg": "RS256",
   "kid": "2011-04-29"
  }

As defined in JSON Web Key (JWK) [JWK] (Jones, M., “JSON Web Key (JWK),” January 2015.) and JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” January 2015.), the REQUIRED members of an RSA public key are:

Therefore, these are the members used in the thumbprint computation.

Their lexicographic order (see more about this in Section 3.3 (Order and Representation of Members in Hash Input)) is:

Therefore the JSON object constructed as an intermediate step in the computation is as follows (with long lines broken for display purposes only):

  {"e":"AQAB","kty":"RSA","n":"0vx7agoebGcQSuuPiLJXZptN9nndrQmbXEps2
  aiAFbWhM78LhWx4cbbfAAtVT86zwu1RK7aPFFxuhDR1L6tSoc_BJECPebWKRXjBZCi
  FV4n3oknjhMstn64tZ_2W-5JsGY4Hc5n9yBXArwl93lqt7_RN5w6Cf0h4QyQ5v-65Y
  GjQR0_FDW2QvzqY368QQMicAtaSqzs8KJZgnYb9c7d0zgdAZHzu6qMQvRL5hajrn1n
  91CbOpbISD08qNLyrdkt-bFTWhAI4vMQFh6WeZu0fM4lFd2NcRwr3XPksINHaQ-G_x
  BniIqbw0Ls1jF44-csFCur-kEgU8awapJzKnqDKgw"}

The octets of the UTF-8 representation of this JSON object are:

[123, 34, 101, 34, 58, 34, 65, 81, 65, 66, 34, 44, 34, 107, 116, 121, 34, 58, 34, 82, 83, 65, 34, 44, 34, 110, 34, 58, 34, 48, 118, 120, 55, 97, 103, 111, 101, 98, 71, 99, 81, 83, 117, 117, 80, 105, 76, 74, 88, 90, 112, 116, 78, 57, 110, 110, 100, 114, 81, 109, 98, 88, 69, 112, 115, 50, 97, 105, 65, 70, 98, 87, 104, 77, 55, 56, 76, 104, 87, 120, 52, 99, 98, 98, 102, 65, 65, 116, 86, 84, 56, 54, 122, 119, 117, 49, 82, 75, 55, 97, 80, 70, 70, 120, 117, 104, 68, 82, 49, 76, 54, 116, 83, 111, 99, 95, 66, 74, 69, 67, 80, 101, 98, 87, 75, 82, 88, 106, 66, 90, 67, 105, 70, 86, 52, 110, 51, 111, 107, 110, 106, 104, 77, 115, 116, 110, 54, 52, 116, 90, 95, 50, 87, 45, 53, 74, 115, 71, 89, 52, 72, 99, 53, 110, 57, 121, 66, 88, 65, 114, 119, 108, 57, 51, 108, 113, 116, 55, 95, 82, 78, 53, 119, 54, 67, 102, 48, 104, 52, 81, 121, 81, 53, 118, 45, 54, 53, 89, 71, 106, 81, 82, 48, 95, 70, 68, 87, 50, 81, 118, 122, 113, 89, 51, 54, 56, 81, 81, 77, 105, 99, 65, 116, 97, 83, 113, 122, 115, 56, 75, 74, 90, 103, 110, 89, 98, 57, 99, 55, 100, 48, 122, 103, 100, 65, 90, 72, 122, 117, 54, 113, 77, 81, 118, 82, 76, 53, 104, 97, 106, 114, 110, 49, 110, 57, 49, 67, 98, 79, 112, 98, 73, 83, 68, 48, 56, 113, 78, 76, 121, 114, 100, 107, 116, 45, 98, 70, 84, 87, 104, 65, 73, 52, 118, 77, 81, 70, 104, 54, 87, 101, 90, 117, 48, 102, 77, 52, 108, 70, 100, 50, 78, 99, 82, 119, 114, 51, 88, 80, 107, 115, 73, 78, 72, 97, 81, 45, 71, 95, 120, 66, 110, 105, 73, 113, 98, 119, 48, 76, 115, 49, 106, 70, 52, 52, 45, 99, 115, 70, 67, 117, 114, 45, 107, 69, 103, 85, 56, 97, 119, 97, 112, 74, 122, 75, 110, 113, 68, 75, 103, 119, 34, 125]

Using SHA-256 [SHS] (National Institute of Standards and Technology, “Secure Hash Standard (SHS),” March 2012.) as the hash function H, the JWK SHA-256 Thumbprint value is the SHA-256 hash of these octets, specifically:

[55, 54, 203, 177, 120, 124, 184, 48, 156, 119, 238, 140, 55, 5, 197, 225, 111, 251, 158, 133, 151, 21, 144, 31, 30, 76, 89, 177, 17, 130, 245, 123]

The base64url encoding [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” January 2015.) of this JWK SHA-256 Thumbprint value (which might, for instance, be used as a kid (key ID) value) is:

  NzbLsXh8uDCcd-6MNwXF4W_7noWXFZAfHkxZsRGC9Xs



 TOC 

3.2.  JWK Members Used in the Thumbprint Computation

Only the REQUIRED members of a key's representation are used when computing its JWK Thumbprint value. As defined in JSON Web Key (JWK) [JWK] (Jones, M., “JSON Web Key (JWK),” January 2015.) and JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” January 2015.), the REQUIRED members of an elliptic curve public key for the curves specified in Section 6.2.1.1 of [JWK] (Jones, M., “JSON Web Key (JWK),” January 2015.), in lexicographic order, are:

the REQUIRED members of an RSA public key, in lexicographic order, are:

and the REQUIRED members of a symmetric key, in lexicographic order, are:

As other key type values are defined, the specifications defining them should be similarly consulted to determine which members, in addition to kty, are REQUIRED.



 TOC 

3.2.1.  JWK Thumbprint of a Private Key

The JWK Thumbprint of a private key is computed as the JWK Thumbprint of the corresponding public key. This has the intentional benefit that the same JWK Thumbprint value can be computed both by parties using either the public or private key. The JWK Thumbprint can then be used to refer to both keys of the key pair. Application context can be used to determine whether the public or the private key is the one being referred to by the JWK Thumbprint.

This specification defines the method of computing JWK Thumbprints of private keys for interoperability reasons -- so that different implementations computing JWK Thumbprints of private keys will produce the same result.



 TOC 

3.2.2.  Why Not Include Optional Members?

OPTIONAL members of JWKs are intentionally not included in the JWK Thumbprint computation so that their absence or presence in the JWK doesn't alter the resulting value. The JWK Thumbprint value is a digest of the key value itself -- not of additional data that may also accompany the key.

OPTIONAL members are not included so that the JWK Thumbprint refers to a key -- not a key with an associated set of key attributes. This has the benefit that while in different application contexts different subsets of attributes about the key might or might not be included in the JWK, the JWK Thumbprint of the key remains the same regardless of which optional attributes are present. Different kinds of thumbprints could be defined by other specifications that might include some or all additional JWK members, should use cases arise where such different kinds of thumbprints would be useful. See Section 9.1 of [JWK] (Jones, M., “JSON Web Key (JWK),” January 2015.) for notes on some ways to cryptographically bind attributes to a key.



 TOC 

3.3.  Order and Representation of Members in Hash Input

The REQUIRED members in the input to the hash function are ordered lexicographically by the Unicode code points of the member names.

Characters in member names and member values MUST be represented without being escaped. This means that thumbprints of JWKs that require such characters are not defined by this specification. (This is not expected to limit the applicability of this specification, in practice, as the REQUIRED members of JWK representations are not expected to use any of these characters.) The characters specified as requiring escaping by Section 7 of [RFC7159] (Bray, T., “The JavaScript Object Notation (JSON) Data Interchange Format,” March 2014.) are quotation mark, reverse solidus (a.k.a. backslash), and the control characters U+0000 through U+001F.

If the JWK key type uses members whose values are themselves JSON objects (as of the time of this writing, none are defined that do), the members of those objects must likewise be lexicographically ordered.

If the JWK key type uses members whose values are JSON numbers (as of the time of this writing, none are defined that do), if the numbers are integers, they MUST be represented as a JSON number as defined in Section 6 of [RFC7159] (Bray, T., “The JavaScript Object Notation (JSON) Data Interchange Format,” March 2014.) without including a fraction part or exponent part. For instance, the value 1.024e3 MUST be represented as 1024. This means that thumbprints of JWKs that use numbers that are not integers are not defined by this specification. Also, as noted in The I-JSON Message Format [I‑D.ietf‑json‑i‑json] (Bray, T., “The I-JSON Message Format,” January 2015.), implementations cannot expect an integer whose absolute value is greater than 9007199254740991 (i.e., that is outside the range [-(2**53)+1, (2**53)-1]) to be treated as an exact value.

See Section 4 (Practical JSON and Unicode Considerations) for a discussion of further practical considerations pertaining to the representation of the hash input.



 TOC 

3.4.  JWK Thumbprints of Keys Not in JWK Format

Note that a key need not be in JWK format to create a JWK Thumbprint of it. The only prerequisites are that the JWK representation of the key be defined and the party creating the JWK Thumbprint is in possession of the necessary key material. These are sufficient to create the hash input from the JWK representation of the key, as described in Section 3.3 (Order and Representation of Members in Hash Input).



 TOC 

4.  Practical JSON and Unicode Considerations

Implementations will almost certainly use functionality provided by the platform's JSON support, such as the JavaScript JSON.parse() JSON.stringify() functions, when parsing the JWK and emitting the JSON object used as the hash input. As a practical consideration, future JWK member names should be avoided for which different platforms or libraries might emit different representations. As of the time of this writing, currently all defined JWK member names use only printable ASCII characters, which should not exhibit this problem. Note however, that JSON.stringify() cannot be counted on to lexicographically sort the members of JSON objects, so while it may be able to be used to emit some kinds of member values, different code is likely to be needed to perform the sorting.

In particular, while the operation of lexicographically ordering member names by their Unicode code points is well defined, different platform sort functions may produce different results for non-ASCII characters, in ways that may not be obvious to developers. If writers of future specifications defining new JWK Key Type values choose to restrict themselves to ASCII member names (which are for machine and not human consumption anyway), some future interoperability problems might be avoided.

Use of escaped characters in the input JWK representation SHOULD be avoided.

While there is a natural representation to use for numeric values that are integers, this specification doesn't attempt to define a standard representation for numbers that are not integers or that contain an exponent component. This is not expected to be a problem in practice, as the REQUIRED members of JWK representations are not expected to use numbers that are not integers.

Use of number representations containing fraction or exponent parts in the input JWK representation SHOULD be avoided.

All of these practical considerations are really an instance of Jon Postel's principle: "Be liberal in what you accept, and conservative in what you send."



 TOC 

5.  IANA Considerations

This specification makes no requests of IANA.



 TOC 

6.  Security Considerations

The JSON Security Considerations and Unicode Comparison Security Considerations described in Sections 10.2 and 10.3 of JSON Web Signature (JWS) [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” January 2015.) also apply to this specification.

Also, as described in Section 4 (Practical JSON and Unicode Considerations), some implementations may produce incorrect results if esoteric or escaped characters are used in the member names. The security implications of this appear to be limited for JWK Thumbprints of public keys, since while it may result in implementations failing to identify the intended key, it should not leak information, since the information in a public key is already public in nature, by definition.

A hash of a symmetric key has the potential to leak information about the key value. Thus, the JWK Thumbprint of a symmetric key should be typically be concealed from parties not in possession of the symmetric key, unless in the application context, the cryptographic hash used, such as SHA-256, is known to provide sufficient protection against disclosure of the key value.

A JWK Thumbprint will only uniquely identify a particular key if a single unambiguous JWK representation for that key is defined and used when computing the JWK Thumbprint. (Such representations are defined for all the key types defined in JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” January 2015.).) For example, if an RSA key were to use "e":"AAEAAQ" (representing [0, 1, 0, 1]) rather than the specified correct representation of "e":"AQAB" (representing [1, 0, 1]), a different thumbprint value would be produced for what could be effectively the same key, at least for implementations that are lax in validating the JWK values that they accept. Thus, JWK Thumbprint values can only be relied upon to be unique for a given key if the implementation also validates that the correct representation of the key is used.



 TOC 

7.  References



 TOC 

7.1. Normative References

[JWA] Jones, M., “JSON Web Algorithms (JWA),” draft-ietf-jose-json-web-algorithms (work in progress), January 2015 (HTML).
[JWE] Jones, M. and J. Hildebrand, “JSON Web Encryption (JWE),” draft-ietf-jose-json-web-encryption (work in progress), January 2015 (HTML).
[JWK] Jones, M., “JSON Web Key (JWK),” draft-ietf-jose-json-web-key (work in progress), January 2015 (HTML).
[JWS] Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” draft-ietf-jose-json-web-signature (work in progress), January 2015 (HTML).
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).
[RFC7159] Bray, T., “The JavaScript Object Notation (JSON) Data Interchange Format,” RFC 7159, March 2014 (TXT).
[SHS] National Institute of Standards and Technology, “Secure Hash Standard (SHS),” FIPS PUB 180-4, March 2012.
[UNICODE] The Unicode Consortium, “The Unicode Standard,” 1991-.


 TOC 

7.2. Informative References

[I-D.ietf-json-i-json] Bray, T., “The I-JSON Message Format,” draft-ietf-json-i-json-06 (work in progress), January 2015 (TXT).


 TOC 

Appendix A.  Acknowledgements

James Manger and John Bradley participated in discussions that led to the creation of this specification. Jim Schaad also contributed to this specification.



 TOC 

Appendix B.  Document History

[[ to be removed by the RFC editor before publication as an RFC ]]

-02

-01

-00



 TOC 

Authors' Addresses

  Michael B. Jones
  Microsoft
Email:  mbj@microsoft.com
URI:  http://self-issued.info/
  
  Nat Sakimura
  Nomura Research Institute
Email:  n-sakimura@nri.co.jp
URI:  http://nat.sakimura.org/