TOC 
JOSE Working GroupM. Jones
Internet-DraftMicrosoft
Intended status: Standards TrackNovember 6, 2012
Expires: May 10, 2013 


JSON Web Key (JWK)
draft-ietf-jose-json-web-key-07

Abstract

A JSON Web Key (JWK) is a JavaScript Object Notation (JSON) data structure that represents a public key. This specification also defines a JSON Web Key Set (JWK Set) JSON data structure for representing a set of JWKs. Cryptographic algorithms and identifiers for use with this specification are described in the separate JSON Web Algorithms (JWA) specification.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on May 10, 2013.

Copyright Notice

Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.



Table of Contents

1.  Introduction
    1.1.  Notational Conventions
2.  Terminology
3.  Example JSON Web Key Set
4.  JSON Web Key (JWK) Format
    4.1.  "alg" (Algorithm Family) Parameter
    4.2.  "use" (Key Use) Parameter
    4.3.  "kid" (Key ID) Parameter
5.  JSON Web Key Set (JWK Set) Format
    5.1.  "keys" (JSON Web Key Set) Parameter
6.  IANA Considerations
    6.1.  JSON Web Key Parameters Registry
        6.1.1.  Registration Template
        6.1.2.  Initial Registry Contents
    6.2.  JSON Web Key Set Parameters Registry
        6.2.1.  Registration Template
        6.2.2.  Initial Registry Contents
7.  Security Considerations
8.  References
    8.1.  Normative References
    8.2.  Informative References
Appendix A.  Acknowledgements
Appendix B.  Open Issues
Appendix C.  Document History
§  Author's Address




 TOC 

1.  Introduction

A JSON Web Key (JWK) is a JavaScript Object Notation (JSON) [RFC4627] (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) data structure that represents a public key. This specification also defines a JSON Web Key Set (JWK Set) JSON data structure for representing a set of JWKs. Cryptographic algorithms and identifiers for use with this specification are described in the separate JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” November 2012.) specification.

Goals for this specification do not include representing private keys, representing symmetric keys, representing certificate chains, representing certified keys, and replacing X.509 certificates.

JWKs and JWK Sets are used in the JSON Web Signature (JWS) [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” November 2012.) and JSON Web Encryption (JWE) [JWE] (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” November 2012.) specifications.



 TOC 

1.1.  Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in Key words for use in RFCs to Indicate Requirement Levels [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).



 TOC 

2.  Terminology

JSON Web Key (JWK)
A JSON data structure that represents a public key.
JSON Web Key Set (JWK Set)
A JSON object that contains an array of JWKs as a member.
Base64url Encoding
The URL- and filename-safe Base64 encoding described in RFC 4648 (Josefsson, S., “The Base16, Base32, and Base64 Data Encodings,” October 2006.) [RFC4648], Section 5, with the (non URL-safe) '=' padding characters omitted, as permitted by Section 3.2. (See Appendix C of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” November 2012.) for notes on implementing base64url encoding without padding.)
Collision Resistant Namespace
A namespace that allows names to be allocated in a manner such that they are highly unlikely to collide with other names. For instance, collision resistance can be achieved through administrative delegation of portions of the namespace or through use of collision-resistant name allocation functions. Examples of Collision Resistant Namespaces include: Domain Names, Object Identifiers (OIDs) as defined in the ITU-T X.660 and X.670 Recommendation series, and Universally Unique IDentifiers (UUIDs) [RFC4122] (Leach, P., Mealling, M., and R. Salz, “A Universally Unique IDentifier (UUID) URN Namespace,” July 2005.). When using an administratively delegated namespace, the definer of a name needs to take reasonable precautions to ensure they are in control of the portion of the namespace they use to define the name.



 TOC 

3.  Example JSON Web Key Set

The following example JWK Set contains two public keys represented as JWKs: one using an Elliptic Curve algorithm and a second one using an RSA algorithm. The first specifies that the key is to be used for encryption. Both provide a Key ID for key matching purposes. In both cases, integers are represented using the base64url encoding of their big endian representations. (Long lines are broken are for display purposes only.)

  {"keys":
    [
      {"alg":"EC",
       "crv":"P-256",
       "x":"MKBCTNIcKUSDii11ySs3526iDZ8AiTo7Tu6KPAqv7D4",
       "y":"4Etl6SRW2YiLUrN5vfvVHuhp7x8PxltmWWlbbM4IFyM",
       "use":"enc",
       "kid":"1"},

      {"alg":"RSA",
       "n": "0vx7agoebGcQSuuPiLJXZptN9nndrQmbXEps2aiAFbWhM78LhWx
  4cbbfAAtVT86zwu1RK7aPFFxuhDR1L6tSoc_BJECPebWKRXjBZCiFV4n3oknjhMs
  tn64tZ_2W-5JsGY4Hc5n9yBXArwl93lqt7_RN5w6Cf0h4QyQ5v-65YGjQR0_FDW2
  QvzqY368QQMicAtaSqzs8KJZgnYb9c7d0zgdAZHzu6qMQvRL5hajrn1n91CbOpbI
  SD08qNLyrdkt-bFTWhAI4vMQFh6WeZu0fM4lFd2NcRwr3XPksINHaQ-G_xBniIqb
  w0Ls1jF44-csFCur-kEgU8awapJzKnqDKgw",
       "e":"AQAB",
       "kid":"2011-04-29"}
    ]
  }


 TOC 

4.  JSON Web Key (JWK) Format

A JSON Web Key (JWK) is a JSON object containing specific members, as specified below. Those members that are common to all key types are defined below.

In addition to the common parameters, each JWK will have members that are specific to the key being represented. These members represent the parameters of the key. Section 5 of the JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” November 2012.) specification defines multiple kinds of public keys and their associated members.

The member names within a JWK MUST be unique; objects with duplicate member names MUST be rejected.

Additional members MAY be present in the JWK. If present, they MUST be understood by implementations using them. Member names used for representing key parameters for different kinds of keys need not be distinct. Member names SHOULD either be registered in the IANA JSON Web Key Parameters registry Section 6.1 (JSON Web Key Parameters Registry) or be URIs that contain a Collision Resistant Namespace.



 TOC 

4.1.  "alg" (Algorithm Family) Parameter

The alg (algorithm family) member identifies the cryptographic algorithm family used with the key. alg values SHOULD either be registered in the IANA JSON Web Key Algorithm Families registry [JWA] (Jones, M., “JSON Web Algorithms (JWA),” November 2012.) or be a URI that contains a Collision Resistant Namespace. The alg value is a case sensitive string. This member is REQUIRED.

A list of defined alg values can be found in the IANA JSON Web Key Algorithm Families registry [JWA] (Jones, M., “JSON Web Algorithms (JWA),” November 2012.); the initial contents of this registry are the values defined in Section 5.1 of the JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” November 2012.) specification.

Additional members used with these alg values can be found in the IANA JSON Web Key Parameters registry Section 6.1 (JSON Web Key Parameters Registry); the initial contents of this registry are the values defined in Sections 5.2 and 5.3 of the JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” November 2012.) specification.



 TOC 

4.2.  "use" (Key Use) Parameter

The use (key use) member identifies the intended use of the key. Values defined by this specification are:

Other values MAY be used. The use value is a case sensitive string. This member is OPTIONAL.



 TOC 

4.3.  "kid" (Key ID) Parameter

The kid (key ID) member can be used to match a specific key. This can be used, for instance, to choose among a set of keys within a JWK Set during key rollover. The interpretation of the kid value is unspecified. Key ID values within a JWK Set need not be unique. The kid value is a case sensitive string. This member is OPTIONAL.

When used with JWS or JWE, the kid value MAY be used to match a JWS or JWE kid header parameter value.

In some contexts, different keys using the same Key ID value might be present, with the keys being disambiguated using other information, such as the alg or use values. For example, imagine kid values like "Current", "Upcoming", and "Deprecated", used for key rollover guidance. One could apply a label to all keys where the classification fits. If there are multiple "Current" keys, then in this example, they might be differentiated either by having different "alg" or "use" values, or some combination of both. As one example, there might only be one current RSA signing key and one current Elliptic Curve signing key, but both would be "Current".



 TOC 

5.  JSON Web Key Set (JWK Set) Format

A JSON Web Key Set (JWK Set) is a JSON object that contains an array of JSON Web Key values as the value of its keys member.

The member names within a JWK Set MUST be unique; objects with duplicate member names MUST be rejected.

Additional members MAY be present in the JWK Set. If present, they MUST be understood by implementations using them. Parameters for representing additional properties of JWK Sets SHOULD either be registered in the IANA JSON Web Key Set Parameters registry Section 6.2 (JSON Web Key Set Parameters Registry) or be a URI that contains a Collision Resistant Namespace.



 TOC 

5.1.  "keys" (JSON Web Key Set) Parameter

The value of the keys (JSON Web Key Set) member is an array of JSON Web Key (JWK) values. This member is REQUIRED.



 TOC 

6.  IANA Considerations

The following registration procedure is used for all the registries established by this specification.

Values are registered with a Specification Required [RFC5226] (Narten, T. and H. Alvestrand, “Guidelines for Writing an IANA Considerations Section in RFCs,” May 2008.) after a two-week review period on the [TBD]@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published.

Registration requests must be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for access token type: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: jose-reg-review. ]]

Within the review period, the Designated Expert(s) will either approve or deny the registration request, communicating this decision to the review list and IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful.

IANA must only accept registry updates from the Designated Expert(s) and should direct all requests for registration to the review mailing list.



 TOC 

6.1.  JSON Web Key Parameters Registry

This specification establishes the IANA JSON Web Key Parameters registry for reserved JWK parameter names. The registry records the reserved parameter name and a reference to the specification that defines it. This specification registers the parameter names defined in Section 4 (JSON Web Key (JWK) Format). The same JWK parameter name may be registered multiple times, provided that duplicate parameter registrations are only for algorithm-specific JWK parameters; in this case, the meaning of the duplicate parameter name is disambiguated by the alg value of the JWK containing it.



 TOC 

6.1.1.  Registration Template

Parameter Name:
The name requested (e.g., "example"). This name is case sensitive. Names that match other registered names in a case insensitive manner SHOULD NOT be accepted.
Change Controller:
For Standards Track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, email address, home page URI) may also be included.
Specification Document(s):
Reference to the document(s) that specify the parameter, preferably including URI(s) that can be used to retrieve copies of the document(s). An indication of the relevant sections may also be included but is not required.



 TOC 

6.1.2.  Initial Registry Contents



 TOC 

6.2.  JSON Web Key Set Parameters Registry

This specification establishes the IANA JSON Web Key Set Parameters registry for reserved JWK Set parameter names. The registry records the reserved parameter name and a reference to the specification that defines it. This specification registers the parameter names defined in Section 5 (JSON Web Key Set (JWK Set) Format).



 TOC 

6.2.1.  Registration Template

Parameter Name:
The name requested (e.g., "example"). This name is case sensitive. Names that match other registered names in a case insensitive manner SHOULD NOT be accepted.
Change Controller:
For Standards Track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, email address, home page URI) may also be included.
Specification Document(s):
Reference to the document(s) that specify the parameter, preferably including URI(s) that can be used to retrieve copies of the document(s). An indication of the relevant sections may also be included but is not required.



 TOC 

6.2.2.  Initial Registry Contents



 TOC 

7.  Security Considerations

All of the security issues faced by any cryptographic application must be faced by a JWS/JWE/JWK agent. Among these issues are protecting the user's private key, preventing various attacks, and helping the user avoid mistakes such as inadvertently encrypting a message for the wrong recipient. The entire list of security considerations is beyond the scope of this document, but some significant concerns are listed here.

A key is no more trustworthy than the method by which it was received.

Per Section 4.3 ("kid" (Key ID) Parameter), applications should not assume that kid values are unique within a JWK Set.

The security considerations in XML DSIG 2.0 (Reagle, J., Solo, D., Datta, P., Hirsch, F., Eastlake, D., Cantor, S., Roessler, T., and K. Yiu, “XML Signature Syntax and Processing Version 2.0,” January 2012.) [W3C.CR‑xmldsig‑core2‑20120124], about public key representations also apply to this specification, other than those that are XML specific.



 TOC 

8.  References



 TOC 

8.1. Normative References

[JWA] Jones, M., “JSON Web Algorithms (JWA),” November 2012.
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).
[RFC4627] Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” RFC 4627, July 2006 (TXT).
[RFC4648] Josefsson, S., “The Base16, Base32, and Base64 Data Encodings,” RFC 4648, October 2006 (TXT).
[RFC5226] Narten, T. and H. Alvestrand, “Guidelines for Writing an IANA Considerations Section in RFCs,” BCP 26, RFC 5226, May 2008 (TXT).
[W3C.CR-xmldsig-core2-20120124] Reagle, J., Solo, D., Datta, P., Hirsch, F., Eastlake, D., Cantor, S., Roessler, T., and K. Yiu, “XML Signature Syntax and Processing Version 2.0,” World Wide Web Consortium CR CR-xmldsig-core2-20120124, January 2012 (HTML).


 TOC 

8.2. Informative References

[JWE] Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” November 2012.
[JWS] Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” November 2012.
[MagicSignatures] Panzer (editor), J., Laurie, B., and D. Balfanz, “Magic Signatures,” January 2011.
[RFC4122] Leach, P., Mealling, M., and R. Salz, “A Universally Unique IDentifier (UUID) URN Namespace,” RFC 4122, July 2005 (TXT, HTML, XML).


 TOC 

Appendix A.  Acknowledgements

A JSON representation for RSA public keys was previously introduced by John Panzer, Ben Laurie, and Dirk Balfanz in Magic Signatures (Panzer (editor), J., Laurie, B., and D. Balfanz, “Magic Signatures,” January 2011.) [MagicSignatures].

Jim Schaad and Karen O'Donoghue chaired the JOSE working group and Sean Turner and Stephen Farrell served as Security area directors during the creation of this specification.



 TOC 

Appendix B.  Open Issues

[[ to be removed by the RFC editor before publication as an RFC ]]

The following items remain to be considered or done in this draft:



 TOC 

Appendix C.  Document History

[[ to be removed by the RFC editor before publication as an RFC ]]

-07

-06

-05

-04

-03

-02

-01

-00



 TOC 

Author's Address

  Michael B. Jones
  Microsoft
Email:  mbj@microsoft.com
URI:  http://self-issued.info/