TOC 
JOSE Working GroupM. Jones
Internet-DraftMicrosoft
Intended status: Standards TrackE. Rescorla
Expires: July 2, 2014RTFM
 J. Hildebrand
 Cisco
 December 29, 2013


JSON Web Encryption (JWE)
draft-ietf-jose-json-web-encryption-19

Abstract

JSON Web Encryption (JWE) represents encrypted content using JavaScript Object Notation (JSON) based data structures. Cryptographic algorithms and identifiers for use with this specification are described in the separate JSON Web Algorithms (JWA) specification and IANA registries defined by that specification. Related digital signature and MAC capabilities are described in the separate JSON Web Signature (JWS) specification.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on July 2, 2014.

Copyright Notice

Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.



Table of Contents

1.  Introduction
    1.1.  Notational Conventions
2.  Terminology
3.  JSON Web Encryption (JWE) Overview
    3.1.  Example JWE
4.  JWE Header
    4.1.  Registered Header Parameter Names
        4.1.1.  "alg" (Algorithm) Header Parameter
        4.1.2.  "enc" (Encryption Algorithm) Header Parameter
        4.1.3.  "zip" (Compression Algorithm) Header Parameter
        4.1.4.  "jku" (JWK Set URL) Header Parameter
        4.1.5.  "jwk" (JSON Web Key) Header Parameter
        4.1.6.  "kid" (Key ID) Header Parameter
        4.1.7.  "x5u" (X.509 URL) Header Parameter
        4.1.8.  "x5c" (X.509 Certificate Chain) Header Parameter
        4.1.9.  "x5t" (X.509 Certificate SHA-1 Thumbprint) Header Parameter
        4.1.10.  "typ" (Type) Header Parameter
        4.1.11.  "cty" (Content Type) Header Parameter
        4.1.12.  "crit" (Critical) Header Parameter
    4.2.  Public Header Parameter Names
    4.3.  Private Header Parameter Names
5.  Producing and Consuming JWEs
    5.1.  Message Encryption
    5.2.  Message Decryption
    5.3.  String Comparison Rules
6.  Key Identification
7.  Serializations
    7.1.  JWE Compact Serialization
    7.2.  JWE JSON Serialization
8.  TLS Requirements
9.  Distinguishing between JWS and JWE Objects
10.  IANA Considerations
    10.1.  JSON Web Signature and Encryption Header Parameters Registration
        10.1.1.  Registry Contents
11.  Security Considerations
12.  References
    12.1.  Normative References
    12.2.  Informative References
Appendix A.  JWE Examples
    A.1.  Example JWE using RSAES OAEP and AES GCM
        A.1.1.  JWE Header
        A.1.2.  Content Encryption Key (CEK)
        A.1.3.  Key Encryption
        A.1.4.  Initialization Vector
        A.1.5.  Additional Authenticated Data
        A.1.6.  Content Encryption
        A.1.7.  Complete Representation
        A.1.8.  Validation
    A.2.  Example JWE using RSAES-PKCS1-V1_5 and AES_128_CBC_HMAC_SHA_256
        A.2.1.  JWE Header
        A.2.2.  Content Encryption Key (CEK)
        A.2.3.  Key Encryption
        A.2.4.  Initialization Vector
        A.2.5.  Additional Authenticated Data
        A.2.6.  Content Encryption
        A.2.7.  Complete Representation
        A.2.8.  Validation
    A.3.  Example JWE using AES Key Wrap and AES_128_CBC_HMAC_SHA_256
        A.3.1.  JWE Header
        A.3.2.  Content Encryption Key (CEK)
        A.3.3.  Key Encryption
        A.3.4.  Initialization Vector
        A.3.5.  Additional Authenticated Data
        A.3.6.  Content Encryption
        A.3.7.  Complete Representation
        A.3.8.  Validation
    A.4.  Example JWE using JWE JSON Serialization
        A.4.1.  JWE Per-Recipient Unprotected Headers
        A.4.2.  JWE Protected Header
        A.4.3.  JWE Unprotected Header
        A.4.4.  Complete JWE Header Values
        A.4.5.  Additional Authenticated Data
        A.4.6.  Content Encryption
        A.4.7.  Complete JWE JSON Serialization Representation
Appendix B.  Example AES_128_CBC_HMAC_SHA_256 Computation
    B.1.  Extract MAC_KEY and ENC_KEY from Key
    B.2.  Encrypt Plaintext to Create Ciphertext
    B.3.  64 Bit Big Endian Representation of AAD Length
    B.4.  Initialization Vector Value
    B.5.  Create Input to HMAC Computation
    B.6.  Compute HMAC Value
    B.7.  Truncate HMAC Value to Create Authentication Tag
Appendix C.  Acknowledgements
Appendix D.  Document History
§  Authors' Addresses




 TOC 

1.  Introduction

JSON Web Encryption (JWE) represents encrypted content using JavaScript Object Notation (JSON) [RFC4627] (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) based data structures. The JWE cryptographic mechanisms encrypt and provide integrity protection for an arbitrary sequence of octets.

Two closely related serializations for JWE objects are defined. The JWE Compact Serialization is a compact, URL-safe representation intended for space constrained environments such as HTTP Authorization headers and URI query parameters. The JWE JSON Serialization represents JWE objects as JSON objects and enables the same content to be encrypted to multiple parties. Both share the same cryptographic underpinnings.

Cryptographic algorithms and identifiers for use with this specification are described in the separate JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” December 2013.) specification and IANA registries defined by that specification. Related digital signature and MAC capabilities are described in the separate JSON Web Signature (JWS) [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.) specification.

Names defined by this specification are short because a core goal is for the resulting representations to be compact.



 TOC 

1.1.  Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in Key words for use in RFCs to Indicate Requirement Levels [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.). If these words are used without being spelled in uppercase then they are to be interpreted with their normal natural language meanings.

BASE64URL(OCTETS) denotes the base64url encoding of OCTETS, per Section 2 (Terminology).

UTF8(STRING) denotes the octets of the UTF-8 [RFC3629] (Yergeau, F., “UTF-8, a transformation format of ISO 10646,” November 2003.) representation of STRING.

ASCII(STRING) denotes the octets of the ASCII [USASCII] (American National Standards Institute, “Coded Character Set -- 7-bit American Standard Code for Information Interchange,” 1986.) representation of STRING.

The concatenation of two values A and B is denoted as A || B.



 TOC 

2.  Terminology

These terms defined by the JSON Web Signature (JWS) [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.) specification are incorporated into this specification: "JSON Web Signature (JWS)", "Base64url Encoding", "Collision-Resistant Name", and "StringOrURI".

These terms are defined for use by this specification:

JSON Web Encryption (JWE)
A data structure representing an encrypted and integrity protected message.
Authenticated Encryption with Associated Data (AEAD)
An AEAD algorithm is one that encrypts the Plaintext, allows Additional Authenticated Data to be specified, and provides an integrated content integrity check over the Ciphertext and Additional Authenticated Data. AEAD algorithms accept two inputs, the Plaintext and the Additional Authenticated Data value, and produce two outputs, the Ciphertext and the Authentication Tag value. AES Galois/Counter Mode (GCM) is one such algorithm.
Plaintext
The sequence of octets to be encrypted -- a.k.a., the message. The plaintext can contain an arbitrary sequence of octets.
Ciphertext
An encrypted representation of the Plaintext.
Additional Authenticated Data (AAD)
An input to an AEAD operation that is integrity protected but not encrypted.
Authentication Tag
An output of an AEAD operation that ensures the integrity of the Ciphertext and the Additional Authenticated Data. Note that some algorithms may not use an Authentication Tag, in which case this value is the empty octet sequence.
Content Encryption Key (CEK)
A symmetric key for the AEAD algorithm used to encrypt the Plaintext for the recipient to produce the Ciphertext and the Authentication Tag.
JWE Header
A JSON object (or JSON objects, when using the JWE JSON Serialization) that describes the encryption operations applied to create the JWE Encrypted Key, the JWE Ciphertext, and the JWE Authentication Tag. The members of the JWE Header object(s) are Header Parameters.
JWE Encrypted Key
The result of encrypting the Content Encryption Key (CEK) with the intended recipient's key using the specified algorithm. Note that for some algorithms, the JWE Encrypted Key value is specified as being the empty octet sequence.
JWE Initialization Vector
A sequence of octets containing the Initialization Vector used when encrypting the Plaintext. Note that some algorithms may not use an Initialization Vector, in which case this value is the empty octet sequence.
JWE Ciphertext
A sequence of octets containing the Ciphertext for a JWE.
JWE Authentication Tag
A sequence of octets containing the Authentication Tag for a JWE.
JWE Protected Header
A JSON object that contains the portion of the JWE Header that is integrity protected. For the JWE Compact Serialization, this comprises the entire JWE Header. For the JWE JSON Serialization, this is one component of the JWE Header.
Header Parameter
A name/value pair that is member of the JWE Header.
JWE Compact Serialization
A representation of the JWE as a compact, URL-safe string.
JWE JSON Serialization
A representation of the JWE as a JSON object. Unlike the JWE Compact Serialization, the JWE JSON Serialization enables the same content to be encrypted to multiple parties. This representation is neither compact nor URL-safe.
Key Management Mode
A method of determining the Content Encryption Key (CEK) value to use. Each algorithm used for determining the CEK value uses a specific Key Management Mode. Key Management Modes employed by this specification are Key Encryption, Key Wrapping, Direct Key Agreement, Key Agreement with Key Wrapping, and Direct Encryption.
Key Encryption
A Key Management Mode in which the Content Encryption Key (CEK) value is encrypted to the intended recipient using an asymmetric encryption algorithm.
Key Wrapping
A Key Management Mode in which the Content Encryption Key (CEK) value is encrypted to the intended recipient using a symmetric key wrapping algorithm.
Direct Key Agreement
A Key Management Mode in which a key agreement algorithm is used to agree upon the Content Encryption Key (CEK) value.
Key Agreement with Key Wrapping
A Key Management Mode in which a key agreement algorithm is used to agree upon a symmetric key used to encrypt the Content Encryption Key (CEK) value to the intended recipient using a symmetric key wrapping algorithm.
Direct Encryption
A Key Management Mode in which the Content Encryption Key (CEK) value used is the secret symmetric key value shared between the parties.



 TOC 

3.  JSON Web Encryption (JWE) Overview

JWE represents encrypted content using JSON data structures and base64url encoding. A JWE represents these logical values:

JWE Header
JSON object containing the parameters describing the cryptographic operations and parameters employed. The JWE Header members are the union of the members of the JWE Protected Header, the JWE Shared Unprotected Header, and the JWE Per-Recipient Unprotected Header, as described below.
JWE Encrypted Key
Encrypted Content Encryption Key (CEK) value.
JWE Initialization Vector
Initialization Vector value used when encrypting the plaintext.
JWE Ciphertext
Ciphertext value resulting from authenticated encryption of the plaintext.
JWE Authentication Tag
Authentication Tag value resulting from authenticated encryption of the plaintext with additional associated data.
JWE AAD
Additional value to be integrity protected by the authenticated encryption operation.

The JWE Header represents the combination of these logical values:

JWE Protected Header
JSON object containing some of the parameters describing the cryptographic operations and parameters employed. These parameters apply to all recipients of the JWE. This value is integrity protected in the digital signature or MAC calculation of the JWE Signature.
JWE Shared Unprotected Header
JSON object containing some of the parameters describing the cryptographic operations and parameters employed. These parameters apply to all recipients of the JWE. This value is not integrity protected in the authenticated encryption operation.
JWE Per-Recipient Unprotected Header
JSON object containing some of the parameters describing the cryptographic operations and parameters employed. These parameters apply to a single recipient of the JWE. This value is not integrity protected in the authenticated encryption operation.

This document defines two serializations for JWE objects: a compact, URL-safe serialization called the JWE Compact Serialization and a JSON serialization called the JWE JSON Serialization. In both serializations, the JWE Protected Header, JWE Encrypted Key, JWE Initialization Vector, JWE Ciphertext, and JWE Authentication Tag are base64url encoded for transmission, since JSON lacks a way to directly represent octet sequences. When present, the JWE AAD is also base64url encoded for transmission.

In the JWE Compact Serialization, no JWE Shared Unprotected Header or JWE Per-Recipient Unprotected Header are used. In this case, the JWE Header and the JWE Protected Header are the same.

In the JWE Compact Serialization, a JWE object is represented as the combination of these five string values,

BASE64URL(UTF8(JWE Protected Header)),

BASE64URL(JWE Encrypted Key),

BASE64URL(JWE Initialization Vector),

BASE64URL(JWE Ciphertext), and

BASE64URL(JWE Authentication Tag),

concatenated in that order, with the five strings being separated by four period ('.') characters.

In the JWE JSON Serialization, one or more of the JWE Protected Header, JWE Shared Unprotected Header, and JWE Per-Recipient Unprotected Header MUST be present. In this case, the members of the JWE Header are the combination of the members of the JWE Protected Header, JWE Shared Unprotected Header, and JWE Per-Recipient Unprotected Header values that are present.

In the JWE JSON Serialization, a JWE object is represented as the combination of these eight values,

BASE64URL(UTF8(JWE Protected Header)),

JWE Shared Unprotected Header,

JWE Per-Recipient Unprotected Header,

BASE64URL(JWE Encrypted Key),

BASE64URL(JWE Initialization Vector),

BASE64URL(JWE Ciphertext),

BASE64URL(JWE Authentication Tag), and

BASE64URL(JWE AAD),

with the six base64url encoding result strings and the two unprotected JSON object values being represented as members within a JSON object. The inclusion of some of these values is OPTIONAL. The JWE JSON Serialization can also encrypt the plaintext to multiple recipients. See Section 7.2 (JWE JSON Serialization) for more information about the JWE JSON Serialization.

JWE utilizes authenticated encryption to ensure the confidentiality and integrity of the Plaintext and the integrity of the JWE Protected Header and the JWE AAD.



 TOC 

3.1.  Example JWE

This example encrypts the plaintext "The true sign of intelligence is not knowledge but imagination." to the recipient using RSAES OAEP for key encryption and AES GCM for content encryption.

The following example JWE Protected Header declares that:

  {"alg":"RSA-OAEP","enc":"A256GCM"}

Encoding this JWE Protected Header as BASE64URL(UTF8(JWE Protected Header)) gives this value:

  eyJhbGciOiJSU0EtT0FFUCIsImVuYyI6IkEyNTZHQ00ifQ

The remaining steps to finish creating this JWE are:

The final result in this example (with line breaks for display purposes only) is:

  eyJhbGciOiJSU0EtT0FFUCIsImVuYyI6IkEyNTZHQ00ifQ.
  OKOawDo13gRp2ojaHV7LFpZcgV7T6DVZKTyKOMTYUmKoTCVJRgckCL9kiMT03JGe
  ipsEdY3mx_etLbbWSrFr05kLzcSr4qKAq7YN7e9jwQRb23nfa6c9d-StnImGyFDb
  Sv04uVuxIp5Zms1gNxKKK2Da14B8S4rzVRltdYwam_lDp5XnZAYpQdb76FdIKLaV
  mqgfwX7XWRxv2322i-vDxRfqNzo_tETKzpVLzfiwQyeyPGLBIO56YJ7eObdv0je8
  1860ppamavo35UgoRdbYaBcoh9QcfylQr66oc6vFWXRcZ_ZT2LawVCWTIy3brGPi
  6UklfCpIMfIjf7iGdXKHzg.
  48V1_ALb6US04U3b.
  5eym8TW_c8SuK0ltJ3rpYIzOeDQz7TALvtu6UG9oMo4vpzs9tX_EFShS8iB7j6ji
  SdiwkIr3ajwQzaBtQD_A.
  XFBoMYUZodetZdvTiFvSkQ

See Appendix A.1 (Example JWE using RSAES OAEP and AES GCM) for the complete details of computing this JWE. See other parts of Appendix A (JWE Examples) for additional examples.



 TOC 

4.  JWE Header

The members of the JSON object(s) representing the JWE Header describe the encryption applied to the Plaintext and optionally additional properties of the JWE. The Header Parameter names within the JWE Header MUST be unique; recipients MUST either reject JWEs with duplicate Header Parameter names or use a JSON parser that returns only the lexically last duplicate member name, as specified in Section 15.12 (The JSON Object) of ECMAScript 5.1 [ECMAScript] (Ecma International, “ECMAScript Language Specification, 5.1 Edition,” June 2011.).

Implementations are required to understand the specific Header Parameters defined by this specification that are designated as "MUST be understood" and process them in the manner defined in this specification. All other Header Parameters defined by this specification that are not so designated MUST be ignored when not understood. Unless listed as a critical Header Parameter, per Section 4.1.12 ("crit" (Critical) Header Parameter), all Header Parameters not defined by this specification MUST be ignored when not understood.

There are three classes of Header Parameter names: Registered Header Parameter names, Public Header Parameter names, and Private Header Parameter names.



 TOC 

4.1.  Registered Header Parameter Names

The following Header Parameter names are registered in the IANA JSON Web Signature and Encryption Header Parameters registry defined in [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), with meanings as defined below.

As indicated by the common registry, JWSs and JWEs share a common Header Parameter space; when a parameter is used by both specifications, its usage must be compatible between the specifications.



 TOC 

4.1.1.  "alg" (Algorithm) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the alg Header Parameter defined in Section 4.1.1 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the Header Parameter identifies the cryptographic algorithm used to encrypt or determine the value of the Content Encryption Key (CEK). The encrypted content is not usable if the alg value does not represent a supported algorithm, or if the recipient does not have a key that can be used with that algorithm.

A list of defined alg values for this use can be found in the IANA JSON Web Signature and Encryption Algorithms registry defined in [JWA] (Jones, M., “JSON Web Algorithms (JWA),” December 2013.); the initial contents of this registry are the values defined in Section 4.1 of the JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” December 2013.) specification.



 TOC 

4.1.2.  "enc" (Encryption Algorithm) Header Parameter

The enc (encryption algorithm) Header Parameter identifies the content encryption algorithm used to encrypt the Plaintext to produce the Ciphertext. This algorithm MUST be an AEAD algorithm with a specified key length. The recipient MUST reject the JWE if the enc value does not represent a supported algorithm. enc values should either be registered in the IANA JSON Web Signature and Encryption Algorithms registry defined in [JWA] (Jones, M., “JSON Web Algorithms (JWA),” December 2013.) or be a value that contains a Collision-Resistant Name. The enc value is a case-sensitive string containing a StringOrURI value. This Header Parameter MUST be present and MUST be understood and processed by implementations.

A list of defined enc values for this use can be found in the IANA JSON Web Signature and Encryption Algorithms registry defined in [JWA] (Jones, M., “JSON Web Algorithms (JWA),” December 2013.); the initial contents of this registry are the values defined in Section 5.1 of the JSON Web Algorithms (JWA) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” December 2013.) specification.



 TOC 

4.1.3.  "zip" (Compression Algorithm) Header Parameter

The zip (compression algorithm) applied to the Plaintext before encryption, if any. The zip value defined by this specification is:

Other values MAY be used. Compression algorithm values can be registered in the IANA JSON Web Encryption Compression Algorithm registry defined in [JWA] (Jones, M., “JSON Web Algorithms (JWA),” December 2013.). The zip value is a case-sensitive string. If no zip parameter is present, no compression is applied to the Plaintext before encryption. This Header Parameter MUST be integrity protected, and therefore MUST occur only within the JWE Protected Header, when used. Use of this Header Parameter is OPTIONAL. This Header Parameter MUST be understood and processed by implementations.



 TOC 

4.1.4.  "jku" (JWK Set URL) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the jku Header Parameter defined in Section 4.1.2 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the JWK Set resource contains the public key to which the JWE was encrypted; this can be used to determine the private key needed to decrypt the JWE.



 TOC 

4.1.5.  "jwk" (JSON Web Key) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the jwk Header Parameter defined in Section 4.1.3 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the key is the public key to which the JWE was encrypted; this can be used to determine the private key needed to decrypt the JWE.



 TOC 

4.1.6.  "kid" (Key ID) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the kid Header Parameter defined in Section 4.1.4 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the key hint references the public key to which the JWE was encrypted; this can be used to determine the private key needed to decrypt the JWE. This parameter allows originators to explicitly signal a change of key to JWE recipients.



 TOC 

4.1.7.  "x5u" (X.509 URL) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the x5u Header Parameter defined in Section 4.1.5 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the X.509 public key certificate or certificate chain [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.) contains the public key to which the JWE was encrypted; this can be used to determine the private key needed to decrypt the JWE.



 TOC 

4.1.8.  "x5c" (X.509 Certificate Chain) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the x5c Header Parameter defined in Section 4.1.6 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the X.509 public key certificate or certificate chain [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.) contains the public key to which the JWE was encrypted; this can be used to determine the private key needed to decrypt the JWE.

See Appendix B of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.) for an example x5c value.



 TOC 

4.1.9.  "x5t" (X.509 Certificate SHA-1 Thumbprint) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the x5t Header Parameter defined in Section 4.1.7 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that certificate referenced by the thumbprint contains the public key to which the JWE was encrypted; this can be used to determine the private key needed to decrypt the JWE.



 TOC 

4.1.10.  "typ" (Type) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the typ Header Parameter defined in Section 4.1.8 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the type is of this complete JWE object.



 TOC 

4.1.11.  "cty" (Content Type) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the cty Header Parameter defined in Section 4.1.9 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the type is of the secured content (the payload).



 TOC 

4.1.12.  "crit" (Critical) Header Parameter

This parameter has the same meaning, syntax, and processing rules as the crit Header Parameter defined in Section 4.1.10 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that JWE Header Parameters are being referred to, rather than JWS Header Parameters.



 TOC 

4.2.  Public Header Parameter Names

Additional Header Parameter names can be defined by those using JWEs. However, in order to prevent collisions, any new Header Parameter name should either be registered in the IANA JSON Web Signature and Encryption Header Parameters registry defined in [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.) or be a Public Name: a value that contains a Collision-Resistant Name. In each case, the definer of the name or value needs to take reasonable precautions to make sure they are in control of the part of the namespace they use to define the Header Parameter name.

New Header Parameters should be introduced sparingly, as they can result in non-interoperable JWEs.



 TOC 

4.3.  Private Header Parameter Names

A producer and consumer of a JWE may agree to use Header Parameter names that are Private Names: names that are not Registered Header Parameter names Section 4.1 (Registered Header Parameter Names) or Public Header Parameter names Section 4.2 (Public Header Parameter Names). Unlike Public Header Parameter names, Private Header Parameter names are subject to collision and should be used with caution.



 TOC 

5.  Producing and Consuming JWEs



 TOC 

5.1.  Message Encryption

The message encryption process is as follows. The order of the steps is not significant in cases where there are no dependencies between the inputs and outputs of the steps.

  1. Determine the Key Management Mode employed by the algorithm used to determine the Content Encryption Key (CEK) value. (This is the algorithm recorded in the alg (algorithm) Header Parameter of the resulting JWE.)
  2. When Key Wrapping, Key Encryption, or Key Agreement with Key Wrapping are employed, generate a random Content Encryption Key (CEK) value. See RFC 4086 (Eastlake, D., Schiller, J., and S. Crocker, “Randomness Requirements for Security,” June 2005.) [RFC4086] for considerations on generating random values. The CEK MUST have a length equal to that required for the content encryption algorithm.
  3. When Direct Key Agreement or Key Agreement with Key Wrapping are employed, use the key agreement algorithm to compute the value of the agreed upon key. When Direct Key Agreement is employed, let the Content Encryption Key (CEK) be the agreed upon key. When Key Agreement with Key Wrapping is employed, the agreed upon key will be used to wrap the CEK.
  4. When Key Wrapping, Key Encryption, or Key Agreement with Key Wrapping are employed, encrypt the CEK to the recipient and let the result be the JWE Encrypted Key.
  5. When Direct Key Agreement or Direct Encryption are employed, let the JWE Encrypted Key be the empty octet sequence.
  6. When Direct Encryption is employed, let the Content Encryption Key (CEK) be the shared symmetric key.
  7. Compute the encoded key value BASE64URL(JWE Encrypted Key).
  8. If the JWE JSON Serialization is being used, repeat this process (steps 1-7) for each recipient.
  9. Generate a random JWE Initialization Vector of the correct size for the content encryption algorithm (if required for the algorithm); otherwise, let the JWE Initialization Vector be the empty octet sequence.
  10. Compute the encoded initialization vector value BASE64URL(JWE Initialization Vector).
  11. If a zip parameter was included, compress the Plaintext using the specified compression algorithm.
  12. Serialize the (compressed) Plaintext into an octet sequence M.
  13. Create the JSON object(s) containing the desired set of Header Parameters, which together comprise the JWE Header: the JWE Protected Header, and if the JWE JSON Serialization is being used, the JWE Shared Unprotected Header and the JWE Per-Recipient Unprotected Header.
  14. Compute the Encoded Protected Header value BASE64URL(UTF8(JWE Protected Header)). If the JWE Protected Header is not present (which can only happen when using the JWE JSON Serialization and no protected member is present), let this value be the empty string.
  15. Let the Additional Authenticated Data encryption parameter be ASCII(Encoded Protected Header). However if a JWE AAD value is present (which can only be the case when using the JWE JSON Serialization), instead let the Additional Authenticated Data encryption parameter be ASCII(Encoded Protected Header || '.' || BASE64URL(JWE AAD)).
  16. Encrypt M using the CEK, the JWE Initialization Vector, and the Additional Authenticated Data value using the specified content encryption algorithm to create the JWE Ciphertext value and the JWE Authentication Tag (which is the Authentication Tag output from the encryption operation).
  17. Compute the encoded ciphertext value BASE64URL(JWE Ciphertext).
  18. Compute the encoded authentication tag value BASE64URL(JWE Authentication Tag).
  19. The five encoded values are used in both the JWE Compact Serialization and the JWE JSON Serialization representations.
  20. If a JWE AAD value is present, compute the encoded AAD value BASE64URL(JWE AAD).
  21. Create the desired serialized output. The Compact Serialization of this result is the string BASE64URL(UTF8(JWE Protected Header)) || '.' || BASE64URL(JWE Encrypted Key) || '.' || BASE64URL(JWE Initialization Vector) || '.' || BASE64URL(JWE Ciphertext) || '.' || BASE64URL(JWE Authentication Tag). The JWE JSON Serialization is described in Section 7.2 (JWE JSON Serialization).



 TOC 

5.2.  Message Decryption

The message decryption process is the reverse of the encryption process. The order of the steps is not significant in cases where there are no dependencies between the inputs and outputs of the steps. If any of these steps fails, the encrypted content cannot be validated.

It is an application decision which recipients' encrypted content must successfully validate for the JWE to be accepted. In some cases, encrypted content for all recipients must successfully validate or the JWE will be rejected. In other cases, only the encrypted content for a single recipient needs to be successfully validated. However, in all cases, the encrypted content for at least one recipient MUST successfully validate or the JWE MUST be rejected.

  1. Parse the JWE representation to extract the serialized values for the components of the JWE -- when using the JWE Compact Serialization, the base64url encoded representations of the JWE Protected Header, the JWE Encrypted Key, the JWE Initialization Vector, the JWE Ciphertext, and the JWE Authentication Tag, and when using the JWE JSON Serialization, also the base64url encoded representation of the JWE AAD and the unencoded JWE Shared Unprotected Header and JWE Per-Recipient Unprotected Header values. When using the JWE Compact Serialization, the JWE Protected Header, the JWE Encrypted Key, the JWE Initialization Vector, the JWE Ciphertext, and the JWE Authentication Tag are represented as base64url encoded values in that order, separated by four period ('.') characters. The JWE JSON Serialization is described in Section 7.2 (JWE JSON Serialization).
  2. The encoded representations of the JWE Protected Header, the JWE Encrypted Key, the JWE Initialization Vector, the JWE Ciphertext, the JWE Authentication Tag, and the JWE AAD MUST be successfully base64url decoded following the restriction that no padding characters have been used.
  3. The octet sequence resulting from decoding the encoded JWE Protected Header MUST be a UTF-8 encoded representation of a completely valid JSON object conforming to RFC 4627 (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) [RFC4627], which is the JWE Protected Header.
  4. If using the JWE Compact Serialization, let the JWE Header be the JWE Protected Header; otherwise, when using the JWE JSON Serialization, let the JWE Header be the union of the members of the JWE Protected Header, the JWE Shared Unprotected Header and the corresponding JWE Per-Recipient Unprotected Header, all of which must be completely valid JSON objects.
  5. The resulting JWE Header MUST NOT contain duplicate Header Parameter names. When using the JWE JSON Serialization, this restriction includes that the same Header Parameter name also MUST NOT occur in distinct JSON object values that together comprise the JWE Header.
  6. Verify that the implementation understands and can process all fields that it is required to support, whether required by this specification, by the algorithms being used, or by the crit Header Parameter value, and that the values of those parameters are also understood and supported.
  7. Determine the Key Management Mode employed by the algorithm specified by the alg (algorithm) Header Parameter.
  8. Verify that the JWE uses a key known to the recipient.
  9. When Direct Key Agreement or Key Agreement with Key Wrapping are employed, use the key agreement algorithm to compute the value of the agreed upon key. When Direct Key Agreement is employed, let the Content Encryption Key (CEK) be the agreed upon key. When Key Agreement with Key Wrapping is employed, the agreed upon key will be used to decrypt the JWE Encrypted Key.
  10. When Key Wrapping, Key Encryption, or Key Agreement with Key Wrapping are employed, decrypt the JWE Encrypted Key to produce the Content Encryption Key (CEK). The CEK MUST have a length equal to that required for the content encryption algorithm. Note that when there are multiple recipients, each recipient will only be able decrypt any JWE Encrypted Key values that were encrypted to a key in that recipient's possession. It is therefore normal to only be able to decrypt one of the per-recipient JWE Encrypted Key values to obtain the CEK value. To mitigate the attacks described in RFC 3218 (Rescorla, E., “Preventing the Million Message Attack on Cryptographic Message Syntax,” January 2002.) [RFC3218], the recipient MUST NOT distinguish between format, padding, and length errors of encrypted keys. It is strongly recommended, in the event of receiving an improperly formatted key, that the receiver substitute a randomly generated CEK and proceed to the next step, to mitigate timing attacks.
  11. When Direct Key Agreement or Direct Encryption are employed, verify that the JWE Encrypted Key value is empty octet sequence.
  12. When Direct Encryption is employed, let the Content Encryption Key (CEK) be the shared symmetric key.
  13. If the JWE JSON Serialization is being used, repeat this process (steps 4-12) for each recipient contained in the representation until the CEK value has been determined.
  14. Compute the Encoded Protected Header value BASE64URL(UTF8(JWE Protected Header)). If the JWE Protected Header is not present (which can only happen when using the JWE JSON Serialization and no protected member is present), let this value be the empty string.
  15. Let the Additional Authenticated Data encryption parameter be ASCII(Encoded Protected Header). However if a JWE AAD value is present (which can only be the case when using the JWE JSON Serialization), instead let the Additional Authenticated Data encryption parameter be ASCII(Encoded Protected Header || '.' || BASE64URL(JWE AAD)).
  16. Decrypt the JWE Ciphertext using the CEK, the JWE Initialization Vector, the Additional Authenticated Data value, and the JWE Authentication Tag (which is the Authentication Tag input to the calculation) using the specified content encryption algorithm, returning the decrypted plaintext and validating the JWE Authentication Tag in the manner specified for the algorithm, rejecting the input without emitting any decrypted output if the JWE Authentication Tag is incorrect.
  17. If a zip parameter was included, uncompress the decrypted plaintext using the specified compression algorithm.
  18. If all the previous steps succeeded, output the resulting Plaintext.



 TOC 

5.3.  String Comparison Rules

The string comparison rules for this specification are the same as those defined in Section 5.3 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.).



 TOC 

6.  Key Identification

The key identification methods for this specification are the same as those defined in Section 6 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.), except that the key being identified is the public key to which the JWE was encrypted.



 TOC 

7.  Serializations

JWE objects use one of two serializations, the JWE Compact Serialization or the JWE JSON Serialization. Applications using this specification need to specify what serialization and serialization features are used for that application. For instance, applications might specify that only the JWE JSON Serialization is used, that only JWE JSON Serialization support for a single recipient is used, or that support for multiple recipients is used. JWE implementations only need to implement the features needed for the applications they are designed to support.



 TOC 

7.1.  JWE Compact Serialization

The JWE Compact Serialization represents encrypted content as a compact URL-safe string. This string is BASE64URL(UTF8(JWE Protected Header)) || '.' || BASE64URL(JWE Encrypted Key) || '.' || BASE64URL(JWE Initialization Vector) || '.' || BASE64URL(JWE Ciphertext) || '.' || BASE64URL(JWE Authentication Tag). Only one recipient is supported by the JWE Compact Serialization and it provides no syntax to represent JWE Shared Unprotected Header, JWE Per-Recipient Unprotected Header, or JWE AAD values.



 TOC 

7.2.  JWE JSON Serialization

The JWE JSON Serialization represents encrypted content as a JSON object. Unlike the JWE Compact Serialization, content using the JWE JSON Serialization can be encrypted to more than one recipient.

The representation is closely related to that used in the JWE Compact Serialization, with the following differences for the JWE JSON Serialization:

The syntax of a JWE using the JWE JSON Serialization is as follows:

  {"protected":<integrity-protected shared header contents>",
   "unprotected":<non-integrity-protected shared header contents>",
   "recipients":[
    {"header":"<per-recipient unprotected header 1 contents>",
     "encrypted_key":"<encrypted key 1 contents>"},
    ...
    {"header":"<per-recipient unprotected header N contents>",
     "encrypted_key":"<encrypted key N contents>"}],
   "aad":"<additional authenticated data contents>",
   "iv":"<initialization vector contents>",
   "ciphertext":"<ciphertext contents>",
   "tag":"<authentication tag contents>"
  }

Of these members, only the ciphertext member MUST be present. The iv, tag, and encrypted_key members MUST be present when corresponding JWE Initialization Vector, JWE Authentication Tag, and JWE Encrypted Key values are non-empty. The recipients member MUST be present when any header or encrypted_key members are needed for recipients. At least one of the header, protected, and unprotected members MUST be present so that alg and enc Header Parameter values are conveyed for each recipient computation.

The contents of the JWE Encrypted Key, JWE Initialization Vector, JWE Ciphertext, and JWE Authentication Tag values are exactly as defined in the rest of this specification. They are interpreted and validated in the same manner, with each corresponding JWE Encrypted Key, JWE Initialization Vector, JWE Ciphertext, JWE Authentication Tag, and set of Header Parameter values being created and validated together. The JWE Header values used are the union of the Header Parameters in the JWE Protected Header, JWE Shared Unprotected Header, and corresponding JWE Per-Recipient Unprotected Header values, as described earlier.

Each JWE Encrypted Key value is computed using the parameters of the corresponding JWE Header value in the same manner as for the JWE Compact Serialization. This has the desirable property that each JWE Encrypted Key value in the recipients array is identical to the value that would have been computed for the same parameter in the JWE Compact Serialization. Likewise, the JWE Ciphertext and JWE Authentication Tag values match those produced for the JWE Compact Serialization, provided that the JWE Protected Header value (which represents the integrity-protected Header Parameter values) matches that used in the JWE Compact Serialization.

All recipients use the same JWE Protected Header, JWE Initialization Vector, JWE Ciphertext, and JWE Authentication Tag values, resulting in potentially significant space savings if the message is large. Therefore, all Header Parameters that specify the treatment of the Plaintext value MUST be the same for all recipients. This primarily means that the enc (encryption algorithm) Header Parameter value in the JWE Header for each recipient and any parameters of that algorithm MUST be the same.

See Appendix A.4 (Example JWE using JWE JSON Serialization) for an example of computing a JWE using the JWE JSON Serialization.



 TOC 

8.  TLS Requirements

The TLS requirements for this specification are the same as those defined in Section 8 of [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.).



 TOC 

9.  Distinguishing between JWS and JWE Objects

There are several ways of distinguishing whether an object is a JWS or JWE object. All these methods will yield the same result for all legal input values; they may yield different results for malformed inputs.



 TOC 

10.  IANA Considerations



 TOC 

10.1.  JSON Web Signature and Encryption Header Parameters Registration

This specification registers the Header Parameter names defined in Section 4.1 (Registered Header Parameter Names) in the IANA JSON Web Signature and Encryption Header Parameters registry defined in [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” December 2013.).



 TOC 

10.1.1.  Registry Contents



 TOC 

11.  Security Considerations

All of the security issues faced by any cryptographic application must be faced by a JWS/JWE/JWK agent. Among these issues are protecting the user's private and symmetric keys, preventing various attacks, and helping the user avoid mistakes such as inadvertently encrypting a message for the wrong recipient. The entire list of security considerations is beyond the scope of this document.

All the security considerations in the JWS specification also apply to this specification. Likewise, all the security considerations in XML Encryption 1.1 (Eastlake, D., Reagle, J., Roessler, T., and F. Hirsch, “XML Encryption Syntax and Processing Version 1.1,” March 2012.) [W3C.CR‑xmlenc‑core1‑20120313] also apply, other than those that are XML specific.

When decrypting, particular care must be taken not to allow the JWE recipient to be used as an oracle for decrypting messages. RFC 3218 (Rescorla, E., “Preventing the Million Message Attack on Cryptographic Message Syntax,” January 2002.) [RFC3218] should be consulted for specific countermeasures to attacks on RSAES-PKCS1-V1_5. An attacker might modify the contents of the alg parameter from RSA-OAEP to RSA1_5 in order to generate a formatting error that can be detected and used to recover the CEK even if RSAES OAEP was used to encrypt the CEK. It is therefore particularly important to report all formatting errors to the CEK, Additional Authenticated Data, or ciphertext as a single error when the encrypted content is rejected.

Additionally, this type of attack can be prevented by the use of "key tainting". This method restricts the use of a key to a limited set of algorithms -- usually one. This means, for instance, that if the key is marked as being for RSA-OAEP only, any attempt to decrypt a message using the RSA1_5 algorithm with that key would fail immediately due to invalid use of the key.



 TOC 

12.  References



 TOC 

12.1. Normative References

[ECMAScript] Ecma International, “ECMAScript Language Specification, 5.1 Edition,” ECMA 262, June 2011 (HTML, PDF).
[JWA] Jones, M., “JSON Web Algorithms (JWA),” draft-ietf-jose-json-web-algorithms (work in progress), December 2013 (HTML).
[JWK] Jones, M., “JSON Web Key (JWK),” draft-ietf-jose-json-web-key (work in progress), December 2013 (HTML).
[JWS] Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” draft-ietf-jose-json-web-signature (work in progress), December 2013 (HTML).
[RFC1951] Deutsch, P., “DEFLATE Compressed Data Format Specification version 1.3,” RFC 1951, May 1996 (TXT, PS, PDF).
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).
[RFC3629] Yergeau, F., “UTF-8, a transformation format of ISO 10646,” STD 63, RFC 3629, November 2003 (TXT).
[RFC4086] Eastlake, D., Schiller, J., and S. Crocker, “Randomness Requirements for Security,” BCP 106, RFC 4086, June 2005 (TXT).
[RFC4627] Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” RFC 4627, July 2006 (TXT).
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” RFC 5280, May 2008 (TXT).
[USASCII] American National Standards Institute, “Coded Character Set -- 7-bit American Standard Code for Information Interchange,” ANSI X3.4, 1986.
[W3C.CR-xmlenc-core1-20120313] Eastlake, D., Reagle, J., Roessler, T., and F. Hirsch, “XML Encryption Syntax and Processing Version 1.1,” World Wide Web Consortium CR CR-xmlenc-core1-20120313, March 2012 (HTML).


 TOC 

12.2. Informative References

[I-D.mcgrew-aead-aes-cbc-hmac-sha2] McGrew, D. and K. Paterson, “Authenticated Encryption with AES-CBC and HMAC-SHA,” draft-mcgrew-aead-aes-cbc-hmac-sha2-01 (work in progress), October 2012 (TXT).
[I-D.rescorla-jsms] Rescorla, E. and J. Hildebrand, “JavaScript Message Security Format,” draft-rescorla-jsms-00 (work in progress), March 2011 (TXT).
[JSE] Bradley, J. and N. Sakimura (editor), “JSON Simple Encryption,” September 2010.
[RFC3218] Rescorla, E., “Preventing the Million Message Attack on Cryptographic Message Syntax,” RFC 3218, January 2002 (TXT).
[RFC5652] Housley, R., “Cryptographic Message Syntax (CMS),” STD 70, RFC 5652, September 2009 (TXT).


 TOC 

Appendix A.  JWE Examples

This section provides examples of JWE computations.



 TOC 

A.1.  Example JWE using RSAES OAEP and AES GCM

This example encrypts the plaintext "The true sign of intelligence is not knowledge but imagination." to the recipient using RSAES OAEP for key encryption and AES GCM for content encryption. The representation of this plaintext is:

[84, 104, 101, 32, 116, 114, 117, 101, 32, 115, 105, 103, 110, 32, 111, 102, 32, 105, 110, 116, 101, 108, 108, 105, 103, 101, 110, 99, 101, 32, 105, 115, 32, 110, 111, 116, 32, 107, 110, 111, 119, 108, 101, 100, 103, 101, 32, 98, 117, 116, 32, 105, 109, 97, 103, 105, 110, 97, 116, 105, 111, 110, 46]



 TOC 

A.1.1.  JWE Header

The following example JWE Protected Header declares that:

  {"alg":"RSA-OAEP","enc":"A256GCM"}

Encoding this JWE Protected Header as BASE64URL(UTF8(JWE Protected Header)) gives this value:

  eyJhbGciOiJSU0EtT0FFUCIsImVuYyI6IkEyNTZHQ00ifQ


 TOC 

A.1.2.  Content Encryption Key (CEK)

Generate a 256 bit random Content Encryption Key (CEK). In this example, the value is:

[177, 161, 244, 128, 84, 143, 225, 115, 63, 180, 3, 255, 107, 154, 212, 246, 138, 7, 110, 91, 112, 46, 34, 105, 47, 130, 203, 46, 122, 234, 64, 252]



 TOC 

A.1.3.  Key Encryption

Encrypt the CEK with the recipient's public key using the RSAES OAEP algorithm to produce the JWE Encrypted Key. This example uses the RSA key represented in JSON Web Key [JWK] (Jones, M., “JSON Web Key (JWK),” December 2013.) format below (with line breaks for display purposes only):

  {"kty":"RSA",
   "n":"oahUIoWw0K0usKNuOR6H4wkf4oBUXHTxRvgb48E-BVvxkeDNjbC4he8rUW
        cJoZmds2h7M70imEVhRU5djINXtqllXI4DFqcI1DgjT9LewND8MW2Krf3S
        psk_ZkoFnilakGygTwpZ3uesH-PFABNIUYpOiN15dsQRkgr0vEhxN92i2a
        sbOenSZeyaxziK72UwxrrKoExv6kc5twXTq4h-QChLOln0_mtUZwfsRaMS
        tPs6mS6XrgxnxbWhojf663tuEQueGC-FCMfra36C9knDFGzKsNa7LZK2dj
        YgyD3JR_MB_4NUJW_TqOQtwHYbxevoJArm-L5StowjzGy-_bq6Gw",
   "e":"AQAB",
   "d":"kLdtIj6GbDks_ApCSTYQtelcNttlKiOyPzMrXHeI-yk1F7-kpDxY4-WY5N
        WV5KntaEeXS1j82E375xxhWMHXyvjYecPT9fpwR_M9gV8n9Hrh2anTpTD9
        3Dt62ypW3yDsJzBnTnrYu1iwWRgBKrEYY46qAZIrA2xAwnm2X7uGR1hghk
        qDp0Vqj3kbSCz1XyfCs6_LehBwtxHIyh8Ripy40p24moOAbgxVw3rxT_vl
        t3UVe4WO3JkJOzlpUf-KTVI2Ptgm-dARxTEtE-id-4OJr0h-K-VFs3VSnd
        VTIznSxfyrj8ILL6MG_Uv8YAu7VILSB3lOW085-4qE3DzgrTjgyQ"
  }

The resulting JWE Encrypted Key value is:

[56, 163, 154, 192, 58, 53, 222, 4, 105, 218, 136, 218, 29, 94, 203, 22, 150, 92, 129, 94, 211, 232, 53, 89, 41, 60, 138, 56, 196, 216, 82, 98, 168, 76, 37, 73, 70, 7, 36, 8, 191, 100, 136, 196, 244, 220, 145, 158, 138, 155, 4, 117, 141, 230, 199, 247, 173, 45, 182, 214, 74, 177, 107, 211, 153, 11, 205, 196, 171, 226, 162, 128, 171, 182, 13, 237, 239, 99, 193, 4, 91, 219, 121, 223, 107, 167, 61, 119, 228, 173, 156, 137, 134, 200, 80, 219, 74, 253, 56, 185, 91, 177, 34, 158, 89, 154, 205, 96, 55, 18, 138, 43, 96, 218, 215, 128, 124, 75, 138, 243, 85, 25, 109, 117, 140, 26, 155, 249, 67, 167, 149, 231, 100, 6, 41, 65, 214, 251, 232, 87, 72, 40, 182, 149, 154, 168, 31, 193, 126, 215, 89, 28, 111, 219, 125, 182, 139, 235, 195, 197, 23, 234, 55, 58, 63, 180, 68, 202, 206, 149, 75, 205, 248, 176, 67, 39, 178, 60, 98, 193, 32, 238, 122, 96, 158, 222, 57, 183, 111, 210, 55, 188, 215, 206, 180, 166, 150, 166, 106, 250, 55, 229, 72, 40, 69, 214, 216, 104, 23, 40, 135, 212, 28, 127, 41, 80, 175, 174, 168, 115, 171, 197, 89, 116, 92, 103, 246, 83, 216, 182, 176, 84, 37, 147, 35, 45, 219, 172, 99, 226, 233, 73, 37, 124, 42, 72, 49, 242, 35, 127, 184, 134, 117, 114, 135, 206]

Encoding this JWE Encrypted Key as BASE64URL(JWE Encrypted Key) gives this value (with line breaks for display purposes only):

  OKOawDo13gRp2ojaHV7LFpZcgV7T6DVZKTyKOMTYUmKoTCVJRgckCL9kiMT03JGe
  ipsEdY3mx_etLbbWSrFr05kLzcSr4qKAq7YN7e9jwQRb23nfa6c9d-StnImGyFDb
  Sv04uVuxIp5Zms1gNxKKK2Da14B8S4rzVRltdYwam_lDp5XnZAYpQdb76FdIKLaV
  mqgfwX7XWRxv2322i-vDxRfqNzo_tETKzpVLzfiwQyeyPGLBIO56YJ7eObdv0je8
  1860ppamavo35UgoRdbYaBcoh9QcfylQr66oc6vFWXRcZ_ZT2LawVCWTIy3brGPi
  6UklfCpIMfIjf7iGdXKHzg


 TOC 

A.1.4.  Initialization Vector

Generate a random 96 bit JWE Initialization Vector. In this example, the value is:

[227, 197, 117, 252, 2, 219, 233, 68, 180, 225, 77, 219]

Encoding this JWE Initialization Vector as BASE64URL(JWE Initialization Vector) gives this value:

  48V1_ALb6US04U3b


 TOC 

A.1.5.  Additional Authenticated Data

Let the Additional Authenticated Data encryption parameter be ASCII(BASE64URL(UTF8(JWE Protected Header))). This value is:

[101, 121, 74, 104, 98, 71, 99, 105, 79, 105, 74, 83, 85, 48, 69, 116, 84, 48, 70, 70, 85, 67, 73, 115, 73, 109, 86, 117, 89, 121, 73, 54, 73, 107, 69, 121, 78, 84, 90, 72, 81, 48, 48, 105, 102, 81]



 TOC 

A.1.6.  Content Encryption

Encrypt the Plaintext with AES GCM using the CEK as the encryption key, the JWE Initialization Vector, and the Additional Authenticated Data value above, requesting a 128 bit Authentication Tag output. The resulting Ciphertext is:

[229, 236, 166, 241, 53, 191, 115, 196, 174, 43, 73, 109, 39, 122, 233, 96, 140, 206, 120, 52, 51, 237, 48, 11, 190, 219, 186, 80, 111, 104, 50, 142, 47, 167, 59, 61, 181, 127, 196, 21, 40, 82, 242, 32, 123, 143, 168, 226, 73, 216, 176, 144, 138, 247, 106, 60, 16, 205, 160, 109, 64, 63, 192]

The resulting Authentication Tag value is:

[92, 80, 104, 49, 133, 25, 161, 215, 173, 101, 219, 211, 136, 91, 210, 145]

Encoding this JWE Ciphertext as BASE64URL(JWE Ciphertext) gives this value (with line breaks for display purposes only):

  5eym8TW_c8SuK0ltJ3rpYIzOeDQz7TALvtu6UG9oMo4vpzs9tX_EFShS8iB7j6ji
  SdiwkIr3ajwQzaBtQD_A

Encoding this JWE Authentication Tag as BASE64URL(JWE Authentication Tag) gives this value:

  XFBoMYUZodetZdvTiFvSkQ


 TOC 

A.1.7.  Complete Representation

Assemble the final representation: The Compact Serialization of this result is the string BASE64URL(UTF8(JWE Protected Header)) || '.' || BASE64URL(JWE Encrypted Key) || '.' || BASE64URL(JWE Initialization Vector) || '.' || BASE64URL(JWE Ciphertext) || '.' || BASE64URL(JWE Authentication Tag).

The final result in this example (with line breaks for display purposes only) is:

  eyJhbGciOiJSU0EtT0FFUCIsImVuYyI6IkEyNTZHQ00ifQ.
  OKOawDo13gRp2ojaHV7LFpZcgV7T6DVZKTyKOMTYUmKoTCVJRgckCL9kiMT03JGe
  ipsEdY3mx_etLbbWSrFr05kLzcSr4qKAq7YN7e9jwQRb23nfa6c9d-StnImGyFDb
  Sv04uVuxIp5Zms1gNxKKK2Da14B8S4rzVRltdYwam_lDp5XnZAYpQdb76FdIKLaV
  mqgfwX7XWRxv2322i-vDxRfqNzo_tETKzpVLzfiwQyeyPGLBIO56YJ7eObdv0je8
  1860ppamavo35UgoRdbYaBcoh9QcfylQr66oc6vFWXRcZ_ZT2LawVCWTIy3brGPi
  6UklfCpIMfIjf7iGdXKHzg.
  48V1_ALb6US04U3b.
  5eym8TW_c8SuK0ltJ3rpYIzOeDQz7TALvtu6UG9oMo4vpzs9tX_EFShS8iB7j6ji
  SdiwkIr3ajwQzaBtQD_A.
  XFBoMYUZodetZdvTiFvSkQ


 TOC 

A.1.8.  Validation

This example illustrates the process of creating a JWE with RSAES OAEP for key encryption and AES GCM for content encryption. These results can be used to validate JWE decryption implementations for these algorithms. Note that since the RSAES OAEP computation includes random values, the encryption results above will not be completely reproducible. However, since the AES GCM computation is deterministic, the JWE Encrypted Ciphertext values will be the same for all encryptions performed using these inputs.



 TOC 

A.2.  Example JWE using RSAES-PKCS1-V1_5 and AES_128_CBC_HMAC_SHA_256

This example encrypts the plaintext "Live long and prosper." to the recipient using RSAES-PKCS1-V1_5 for key encryption and AES_128_CBC_HMAC_SHA_256 for content encryption. The representation of this plaintext is:

[76, 105, 118, 101, 32, 108, 111, 110, 103, 32, 97, 110, 100, 32, 112, 114, 111, 115, 112, 101, 114, 46]



 TOC 

A.2.1.  JWE Header

The following example JWE Protected Header declares that:

  {"alg":"RSA1_5","enc":"A128CBC-HS256"}

Encoding this JWE Protected Header as BASE64URL(UTF8(JWE Protected Header)) gives this value:

  eyJhbGciOiJSU0ExXzUiLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0


 TOC 

A.2.2.  Content Encryption Key (CEK)

Generate a 256 bit random Content Encryption Key (CEK). In this example, the key value is:

[4, 211, 31, 197, 84, 157, 252, 254, 11, 100, 157, 250, 63, 170, 106, 206, 107, 124, 212, 45, 111, 107, 9, 219, 200, 177, 0, 240, 143, 156, 44, 207]



 TOC 

A.2.3.  Key Encryption

Encrypt the CEK with the recipient's public key using the RSAES-PKCS1-V1_5 algorithm to produce the JWE Encrypted Key. This example uses the RSA key represented in JSON Web Key [JWK] (Jones, M., “JSON Web Key (JWK),” December 2013.) format below (with line breaks for display purposes only):

  {"kty":"RSA",
   "n":"sXchDaQebHnPiGvyDOAT4saGEUetSyo9MKLOoWFsueri23bOdgWp4Dy1Wl
        UzewbgBHod5pcM9H95GQRV3JDXboIRROSBigeC5yjU1hGzHHyXss8UDpre
        cbAYxknTcQkhslANGRUZmdTOQ5qTRsLAt6BTYuyvVRdhS8exSZEy_c4gs_
        7svlJJQ4H9_NxsiIoLwAEk7-Q3UXERGYw_75IDrGA84-lA_-Ct4eTlXHBI
        Y2EaV7t7LjJaynVJCpkv4LKjTTAumiGUIuQhrNhZLuF_RJLqHpM2kgWFLU
        7-VTdL1VbC2tejvcI2BlMkEpk1BzBZI0KQB0GaDWFLN-aEAw3vRw",
   "e":"AQAB",
   "d":"VFCWOqXr8nvZNyaaJLXdnNPXZKRaWCjkU5Q2egQQpTBMwhprMzWzpR8Sxq
        1OPThh_J6MUD8Z35wky9b8eEO0pwNS8xlh1lOFRRBoNqDIKVOku0aZb-ry
        nq8cxjDTLZQ6Fz7jSjR1Klop-YKaUHc9GsEofQqYruPhzSA-QgajZGPbE_
        0ZaVDJHfyd7UUBUKunFMScbflYAAOYJqVIVwaYR5zWEEceUjNnTNo_CVSj
        -VvXLO5VZfCUAVLgW4dpf1SrtZjSt34YLsRarSb127reG_DUwg9Ch-Kyvj
        T1SkHgUWRVGcyly7uvVGRSDwsXypdrNinPA4jlhoNdizK2zF2CWQ"
  }

The resulting JWE Encrypted Key value is:

[80, 104, 72, 58, 11, 130, 236, 139, 132, 189, 255, 205, 61, 86, 151, 176, 99, 40, 44, 233, 176, 189, 205, 70, 202, 169, 72, 40, 226, 181, 156, 223, 120, 156, 115, 232, 150, 209, 145, 133, 104, 112, 237, 156, 116, 250, 65, 102, 212, 210, 103, 240, 177, 61, 93, 40, 71, 231, 223, 226, 240, 157, 15, 31, 150, 89, 200, 215, 198, 203, 108, 70, 117, 66, 212, 238, 193, 205, 23, 161, 169, 218, 243, 203, 128, 214, 127, 253, 215, 139, 43, 17, 135, 103, 179, 220, 28, 2, 212, 206, 131, 158, 128, 66, 62, 240, 78, 186, 141, 125, 132, 227, 60, 137, 43, 31, 152, 199, 54, 72, 34, 212, 115, 11, 152, 101, 70, 42, 219, 233, 142, 66, 151, 250, 126, 146, 141, 216, 190, 73, 50, 177, 146, 5, 52, 247, 28, 197, 21, 59, 170, 247, 181, 89, 131, 241, 169, 182, 246, 99, 15, 36, 102, 166, 182, 172, 197, 136, 230, 120, 60, 58, 219, 243, 149, 94, 222, 150, 154, 194, 110, 227, 225, 112, 39, 89, 233, 112, 207, 211, 241, 124, 174, 69, 221, 179, 107, 196, 225, 127, 167, 112, 226, 12, 242, 16, 24, 28, 120, 182, 244, 213, 244, 153, 194, 162, 69, 160, 244, 248, 63, 165, 141, 4, 207, 249, 193, 79, 131, 0, 169, 233, 127, 167, 101, 151, 125, 56, 112, 111, 248, 29, 232, 90, 29, 147, 110, 169, 146, 114, 165, 204, 71, 136, 41, 252]

Encoding this JWE Encrypted Key as BASE64URL(JWE Encrypted Key) gives this value (with line breaks for display purposes only):

  UGhIOguC7IuEvf_NPVaXsGMoLOmwvc1GyqlIKOK1nN94nHPoltGRhWhw7Zx0-kFm
  1NJn8LE9XShH59_i8J0PH5ZZyNfGy2xGdULU7sHNF6Gp2vPLgNZ__deLKxGHZ7Pc
  HALUzoOegEI-8E66jX2E4zyJKx-YxzZIItRzC5hlRirb6Y5Cl_p-ko3YvkkysZIF
  NPccxRU7qve1WYPxqbb2Yw8kZqa2rMWI5ng8OtvzlV7elprCbuPhcCdZ6XDP0_F8
  rkXds2vE4X-ncOIM8hAYHHi29NX0mcKiRaD0-D-ljQTP-cFPgwCp6X-nZZd9OHBv
  -B3oWh2TbqmScqXMR4gp_A


 TOC 

A.2.4.  Initialization Vector

Generate a random 128 bit JWE Initialization Vector. In this example, the value is:

[3, 22, 60, 12, 43, 67, 104, 105, 108, 108, 105, 99, 111, 116, 104, 101]

Encoding this JWE Initialization Vector as BASE64URL(JWE Initialization Vector) gives this value:

  AxY8DCtDaGlsbGljb3RoZQ


 TOC 

A.2.5.  Additional Authenticated Data

Let the Additional Authenticated Data encryption parameter be ASCII(BASE64URL(UTF8(JWE Protected Header))). This value is:

[101, 121, 74, 104, 98, 71, 99, 105, 79, 105, 74, 83, 85, 48, 69, 120, 88, 122, 85, 105, 76, 67, 74, 108, 98, 109, 77, 105, 79, 105, 74, 66, 77, 84, 73, 52, 81, 48, 74, 68, 76, 85, 104, 84, 77, 106, 85, 50, 73, 110, 48]



 TOC 

A.2.6.  Content Encryption

Encrypt the Plaintext with AES_128_CBC_HMAC_SHA_256 using the CEK as the encryption key, the JWE Initialization Vector, and the Additional Authenticated Data value above. The steps for doing this using the values from Appendix A.3 (Example JWE using AES Key Wrap and AES_128_CBC_HMAC_SHA_256) are detailed in Appendix B (Example AES_128_CBC_HMAC_SHA_256 Computation). The resulting Ciphertext is:

[40, 57, 83, 181, 119, 33, 133, 148, 198, 185, 243, 24, 152, 230, 6, 75, 129, 223, 127, 19, 210, 82, 183, 230, 168, 33, 215, 104, 143, 112, 56, 102]

The resulting Authentication Tag value is:

[246, 17, 244, 190, 4, 95, 98, 3, 231, 0, 115, 157, 242, 203, 100, 191]

Encoding this JWE Ciphertext as BASE64URL(JWE Ciphertext) gives this value:

  KDlTtXchhZTGufMYmOYGS4HffxPSUrfmqCHXaI9wOGY

Encoding this JWE Authentication Tag as BASE64URL(JWE Authentication Tag) gives this value:

  9hH0vgRfYgPnAHOd8stkvw


 TOC 

A.2.7.  Complete Representation

Assemble the final representation: The Compact Serialization of this result is the string BASE64URL(UTF8(JWE Protected Header)) || '.' || BASE64URL(JWE Encrypted Key) || '.' || BASE64URL(JWE Initialization Vector) || '.' || BASE64URL(JWE Ciphertext) || '.' || BASE64URL(JWE Authentication Tag).

The final result in this example (with line breaks for display purposes only) is:

  eyJhbGciOiJSU0ExXzUiLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0.
  UGhIOguC7IuEvf_NPVaXsGMoLOmwvc1GyqlIKOK1nN94nHPoltGRhWhw7Zx0-kFm
  1NJn8LE9XShH59_i8J0PH5ZZyNfGy2xGdULU7sHNF6Gp2vPLgNZ__deLKxGHZ7Pc
  HALUzoOegEI-8E66jX2E4zyJKx-YxzZIItRzC5hlRirb6Y5Cl_p-ko3YvkkysZIF
  NPccxRU7qve1WYPxqbb2Yw8kZqa2rMWI5ng8OtvzlV7elprCbuPhcCdZ6XDP0_F8
  rkXds2vE4X-ncOIM8hAYHHi29NX0mcKiRaD0-D-ljQTP-cFPgwCp6X-nZZd9OHBv
  -B3oWh2TbqmScqXMR4gp_A.
  AxY8DCtDaGlsbGljb3RoZQ.
  KDlTtXchhZTGufMYmOYGS4HffxPSUrfmqCHXaI9wOGY.
  9hH0vgRfYgPnAHOd8stkvw


 TOC 

A.2.8.  Validation

This example illustrates the process of creating a JWE with RSAES-PKCS1-V1_5 for key encryption and AES_CBC_HMAC_SHA2 for content encryption. These results can be used to validate JWE decryption implementations for these algorithms. Note that since the RSAES-PKCS1-V1_5 computation includes random values, the encryption results above will not be completely reproducible. However, since the AES CBC computation is deterministic, the JWE Encrypted Ciphertext values will be the same for all encryptions performed using these inputs.



 TOC 

A.3.  Example JWE using AES Key Wrap and AES_128_CBC_HMAC_SHA_256

This example encrypts the plaintext "Live long and prosper." to the recipient using AES Key Wrap for key encryption and AES GCM for content encryption. The representation of this plaintext is:

[76, 105, 118, 101, 32, 108, 111, 110, 103, 32, 97, 110, 100, 32, 112, 114, 111, 115, 112, 101, 114, 46]



 TOC 

A.3.1.  JWE Header

The following example JWE Protected Header declares that:

  {"alg":"A128KW","enc":"A128CBC-HS256"}

Encoding this JWE Protected Header as BASE64URL(UTF8(JWE Protected Header)) gives this value:

  eyJhbGciOiJBMTI4S1ciLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0


 TOC 

A.3.2.  Content Encryption Key (CEK)

Generate a 256 bit random Content Encryption Key (CEK). In this example, the value is:

[4, 211, 31, 197, 84, 157, 252, 254, 11, 100, 157, 250, 63, 170, 106, 206, 107, 124, 212, 45, 111, 107, 9, 219, 200, 177, 0, 240, 143, 156, 44, 207]



 TOC 

A.3.3.  Key Encryption

Encrypt the CEK with the shared symmetric key using the AES Key Wrap algorithm to produce the JWE Encrypted Key. This example uses the symmetric key represented in JSON Web Key [JWK] (Jones, M., “JSON Web Key (JWK),” December 2013.) format below:

  {"kty":"oct",
   "k":"GawgguFyGrWKav7AX4VKUg"
  }

The resulting JWE Encrypted Key value is:

[232, 160, 123, 211, 183, 76, 245, 132, 200, 128, 123, 75, 190, 216, 22, 67, 201, 138, 193, 186, 9, 91, 122, 31, 246, 90, 28, 139, 57, 3, 76, 124, 193, 11, 98, 37, 173, 61, 104, 57]

Encoding this JWE Encrypted Key as BASE64URL(JWE Encrypted Key) gives this value:

  6KB707dM9YTIgHtLvtgWQ8mKwboJW3of9locizkDTHzBC2IlrT1oOQ


 TOC 

A.3.4.  Initialization Vector

Generate a random 128 bit JWE Initialization Vector. In this example, the value is:

[3, 22, 60, 12, 43, 67, 104, 105, 108, 108, 105, 99, 111, 116, 104, 101]

Encoding this JWE Initialization Vector as BASE64URL(JWE Initialization Vector) gives this value:

  AxY8DCtDaGlsbGljb3RoZQ


 TOC 

A.3.5.  Additional Authenticated Data

Let the Additional Authenticated Data encryption parameter be ASCII(BASE64URL(UTF8(JWE Protected Header))). This value is:

[101, 121, 74, 104, 98, 71, 99, 105, 79, 105, 74, 66, 77, 84, 73, 52, 83, 49, 99, 105, 76, 67, 74, 108, 98, 109, 77, 105, 79, 105, 74, 66, 77, 84, 73, 52, 81, 48, 74, 68, 76, 85, 104, 84, 77, 106, 85, 50, 73, 110, 48]



 TOC 

A.3.6.  Content Encryption

Encrypt the Plaintext with AES_128_CBC_HMAC_SHA_256 using the CEK as the encryption key, the JWE Initialization Vector, and the Additional Authenticated Data value above. The steps for doing this using the values from this example are detailed in Appendix B (Example AES_128_CBC_HMAC_SHA_256 Computation). The resulting Ciphertext is:

[40, 57, 83, 181, 119, 33, 133, 148, 198, 185, 243, 24, 152, 230, 6, 75, 129, 223, 127, 19, 210, 82, 183, 230, 168, 33, 215, 104, 143, 112, 56, 102]

The resulting Authentication Tag value is:

[83, 73, 191, 98, 104, 205, 211, 128, 201, 189, 199, 133, 32, 38, 194, 85]

Encoding this JWE Ciphertext as BASE64URL(JWE Ciphertext) gives this value:

  KDlTtXchhZTGufMYmOYGS4HffxPSUrfmqCHXaI9wOGY

Encoding this JWE Authentication Tag as BASE64URL(JWE Authentication Tag) gives this value:

  U0m_YmjN04DJvceFICbCVQ


 TOC 

A.3.7.  Complete Representation

Assemble the final representation: The Compact Serialization of this result is the string BASE64URL(UTF8(JWE Protected Header)) || '.' || BASE64URL(JWE Encrypted Key) || '.' || BASE64URL(JWE Initialization Vector) || '.' || BASE64URL(JWE Ciphertext) || '.' || BASE64URL(JWE Authentication Tag).

The final result in this example (with line breaks for display purposes only) is:

  eyJhbGciOiJBMTI4S1ciLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0.
  6KB707dM9YTIgHtLvtgWQ8mKwboJW3of9locizkDTHzBC2IlrT1oOQ.
  AxY8DCtDaGlsbGljb3RoZQ.
  KDlTtXchhZTGufMYmOYGS4HffxPSUrfmqCHXaI9wOGY.
  U0m_YmjN04DJvceFICbCVQ


 TOC 

A.3.8.  Validation

This example illustrates the process of creating a JWE with AES Key Wrap for key encryption and AES GCM for content encryption. These results can be used to validate JWE decryption implementations for these algorithms. Also, since both the AES Key Wrap and AES GCM computations are deterministic, the resulting JWE value will be the same for all encryptions performed using these inputs. Since the computation is reproducible, these results can also be used to validate JWE encryption implementations for these algorithms.



 TOC 

A.4.  Example JWE using JWE JSON Serialization

This section contains an example using the JWE JSON Serialization. This example demonstrates the capability for encrypting the same plaintext to multiple recipients.

Two recipients are present in this example. The algorithm and key used for the first recipient are the same as that used in Appendix A.2 (Example JWE using RSAES-PKCS1-V1_5 and AES_128_CBC_HMAC_SHA_256). The algorithm and key used for the second recipient are the same as that used in Appendix A.3 (Example JWE using AES Key Wrap and AES_128_CBC_HMAC_SHA_256). The resulting JWE Encrypted Key values are therefore the same; those computations are not repeated here.

The Plaintext, the Content Encryption Key (CEK), Initialization Vector, and JWE Protected Header are shared by all recipients (which must be the case, since the Ciphertext and Authentication Tag are also shared).



 TOC 

A.4.1.  JWE Per-Recipient Unprotected Headers

The first recipient uses the RSAES-PKCS1-V1_5 algorithm to encrypt the Content Encryption Key (CEK). The second uses AES Key Wrap to encrypt the CEK. Key ID values are supplied for both keys. The two per-recipient header values used to represent these algorithms and Key IDs are:

  {"alg":"RSA1_5","kid":"2011-04-29"}

and

  {"alg":"A128KW","kid":"7"}


 TOC 

A.4.2.  JWE Protected Header

The Plaintext is encrypted using the AES_128_CBC_HMAC_SHA_256 algorithm to produce the common JWE Ciphertext and JWE Authentication Tag values. The JWE Protected Header value representing this is:

  {"enc":"A128CBC-HS256"}

Encoding this JWE Protected Header as BASE64URL(UTF8(JWE Protected Header)) gives this value:

  eyJlbmMiOiJBMTI4Q0JDLUhTMjU2In0


 TOC 

A.4.3.  JWE Unprotected Header

This JWE uses the jku Header Parameter to reference a JWK Set. This is represented in the following JWE Unprotected Header value as:

  {"jku":"https://server.example.com/keys.jwks"}


 TOC 

A.4.4.  Complete JWE Header Values

Combining the per-recipient, protected, and unprotected header values supplied, the JWE Header values used for the first and second recipient respectively are:

  {"alg":"RSA1_5",
   "kid":"2011-04-29",
   "enc":"A128CBC-HS256",
   "jku":"https://server.example.com/keys.jwks"}

and

  {"alg":"A128KW",
   "kid":"7",
   "enc":"A128CBC-HS256",
   "jku":"https://server.example.com/keys.jwks"}


 TOC 

A.4.5.  Additional Authenticated Data

Let the Additional Authenticated Data encryption parameter be ASCII(BASE64URL(UTF8(JWE Protected Header))). This value is:

[101, 121, 74, 108, 98, 109, 77, 105, 79, 105, 74, 66, 77, 84, 73, 52, 81, 48, 74, 68, 76, 85, 104, 84, 77, 106, 85, 50, 73, 110, 48]



 TOC 

A.4.6.  Content Encryption

Encrypt the Plaintext with AES_128_CBC_HMAC_SHA_256 using the CEK as the encryption key, the JWE Initialization Vector, and the Additional Authenticated Data value above. The steps for doing this using the values from Appendix A.3 (Example JWE using AES Key Wrap and AES_128_CBC_HMAC_SHA_256) are detailed in Appendix B (Example AES_128_CBC_HMAC_SHA_256 Computation). The resulting Ciphertext is:

[40, 57, 83, 181, 119, 33, 133, 148, 198, 185, 243, 24, 152, 230, 6, 75, 129, 223, 127, 19, 210, 82, 183, 230, 168, 33, 215, 104, 143, 112, 56, 102]

The resulting Authentication Tag value is:

[51, 63, 149, 60, 252, 148, 225, 25, 92, 185, 139, 245, 35, 2, 47, 207]

Encoding this JWE Ciphertext as BASE64URL(JWE Ciphertext) gives this value:

  KDlTtXchhZTGufMYmOYGS4HffxPSUrfmqCHXaI9wOGY

Encoding this JWE Authentication Tag as BASE64URL(JWE Authentication Tag) gives this value:

  Mz-VPPyU4RlcuYv1IwIvzw


 TOC 

A.4.7.  Complete JWE JSON Serialization Representation

The complete JSON Web Encryption JSON Serialization for these values is as follows (with line breaks for display purposes only):

  {"protected":
    "eyJlbmMiOiJBMTI4Q0JDLUhTMjU2In0",
   "unprotected":
    {"jku":"https://server.example.com/keys.jwks"},
   "recipients":[
    {"header":
      {"alg":"RSA1_5"},
     "encrypted_key":
      "UGhIOguC7IuEvf_NPVaXsGMoLOmwvc1GyqlIKOK1nN94nHPoltGRhWhw7Zx0-
       kFm1NJn8LE9XShH59_i8J0PH5ZZyNfGy2xGdULU7sHNF6Gp2vPLgNZ__deLKx
       GHZ7PcHALUzoOegEI-8E66jX2E4zyJKx-YxzZIItRzC5hlRirb6Y5Cl_p-ko3
       YvkkysZIFNPccxRU7qve1WYPxqbb2Yw8kZqa2rMWI5ng8OtvzlV7elprCbuPh
       cCdZ6XDP0_F8rkXds2vE4X-ncOIM8hAYHHi29NX0mcKiRaD0-D-ljQTP-cFPg
       wCp6X-nZZd9OHBv-B3oWh2TbqmScqXMR4gp_A"},
    {"header":
      {"alg":"A128KW"},
     "encrypted_key":
      "6KB707dM9YTIgHtLvtgWQ8mKwboJW3of9locizkDTHzBC2IlrT1oOQ"}],
   "iv":
    "AxY8DCtDaGlsbGljb3RoZQ",
   "ciphertext":
    "KDlTtXchhZTGufMYmOYGS4HffxPSUrfmqCHXaI9wOGY",
   "tag":
    "Mz-VPPyU4RlcuYv1IwIvzw"
  }


 TOC 

Appendix B.  Example AES_128_CBC_HMAC_SHA_256 Computation

This example shows the steps in the AES_128_CBC_HMAC_SHA_256 authenticated encryption computation using the values from the example in Appendix A.3 (Example JWE using AES Key Wrap and AES_128_CBC_HMAC_SHA_256). As described where this algorithm is defined in Sections 4.8 and 4.8.3 of JWA, the AES_CBC_HMAC_SHA2 family of algorithms are implemented using Advanced Encryption Standard (AES) in Cipher Block Chaining (CBC) mode with PKCS #5 padding to perform the encryption and an HMAC SHA-2 function to perform the integrity calculation - in this case, HMAC SHA-256.



 TOC 

B.1.  Extract MAC_KEY and ENC_KEY from Key

The 256 bit AES_128_CBC_HMAC_SHA_256 key K used in this example is:

[4, 211, 31, 197, 84, 157, 252, 254, 11, 100, 157, 250, 63, 170, 106, 206, 107, 124, 212, 45, 111, 107, 9, 219, 200, 177, 0, 240, 143, 156, 44, 207]

Use the first 128 bits of this key as the HMAC SHA-256 key MAC_KEY, which is:

[4, 211, 31, 197, 84, 157, 252, 254, 11, 100, 157, 250, 63, 170, 106, 206]

Use the last 128 bits of this key as the AES CBC key ENC_KEY, which is:

[107, 124, 212, 45, 111, 107, 9, 219, 200, 177, 0, 240, 143, 156, 44, 207]

Note that the MAC key comes before the encryption key in the input key K; this is in the opposite order of the algorithm names in the identifiers "AES_128_CBC_HMAC_SHA_256" and A128CBC-HS256.



 TOC 

B.2.  Encrypt Plaintext to Create Ciphertext

Encrypt the Plaintext with AES in Cipher Block Chaining (CBC) mode using PKCS #5 padding using the ENC_KEY above. The Plaintext in this example is:

[76, 105, 118, 101, 32, 108, 111, 110, 103, 32, 97, 110, 100, 32, 112, 114, 111, 115, 112, 101, 114, 46]

The encryption result is as follows, which is the Ciphertext output:

[40, 57, 83, 181, 119, 33, 133, 148, 198, 185, 243, 24, 152, 230, 6, 75, 129, 223, 127, 19, 210, 82, 183, 230, 168, 33, 215, 104, 143, 112, 56, 102]



 TOC 

B.3.  64 Bit Big Endian Representation of AAD Length

The Additional Authenticated Data (AAD) in this example is:

[101, 121, 74, 104, 98, 71, 99, 105, 79, 105, 74, 66, 77, 84, 73, 52, 83, 49, 99, 105, 76, 67, 74, 108, 98, 109, 77, 105, 79, 105, 74, 66, 77, 84, 73, 52, 81, 48, 74, 68, 76, 85, 104, 84, 77, 106, 85, 50, 73, 110, 48]

This AAD is 51 bytes long, which is 408 bits long. The octet string AL, which is the number of bits in AAD expressed as a big endian 64 bit unsigned integer is:

[0, 0, 0, 0, 0, 0, 1, 152]



 TOC 

B.4.  Initialization Vector Value

The Initialization Vector value used in this example is:

[3, 22, 60, 12, 43, 67, 104, 105, 108, 108, 105, 99, 111, 116, 104, 101]



 TOC 

B.5.  Create Input to HMAC Computation

Concatenate the AAD, the Initialization Vector, the Ciphertext, and the AL value. The result of this concatenation is:

[101, 121, 74, 104, 98, 71, 99, 105, 79, 105, 74, 66, 77, 84, 73, 52, 83, 49, 99, 105, 76, 67, 74, 108, 98, 109, 77, 105, 79, 105, 74, 66, 77, 84, 73, 52, 81, 48, 74, 68, 76, 85, 104, 84, 77, 106, 85, 50, 73, 110, 48, 3, 22, 60, 12, 43, 67, 104, 105, 108, 108, 105, 99, 111, 116, 104, 101, 40, 57, 83, 181, 119, 33, 133, 148, 198, 185, 243, 24, 152, 230, 6, 75, 129, 223, 127, 19, 210, 82, 183, 230, 168, 33, 215, 104, 143, 112, 56, 102, 0, 0, 0, 0, 0, 0, 1, 152]



 TOC 

B.6.  Compute HMAC Value

Compute the HMAC SHA-256 of the concatenated value above. This result M is:

[83, 73, 191, 98, 104, 205, 211, 128, 201, 189, 199, 133, 32, 38, 194, 85, 9, 84, 229, 201, 219, 135, 44, 252, 145, 102, 179, 140, 105, 86, 229, 116]



 TOC 

B.7.  Truncate HMAC Value to Create Authentication Tag

Use the first half (128 bits) of the HMAC output M as the Authentication Tag output T. This truncated value is:

[83, 73, 191, 98, 104, 205, 211, 128, 201, 189, 199, 133, 32, 38, 194, 85]



 TOC 

Appendix C.  Acknowledgements

Solutions for encrypting JSON content were also explored by JSON Simple Encryption (Bradley, J. and N. Sakimura (editor), “JSON Simple Encryption,” September 2010.) [JSE] and JavaScript Message Security Format (Rescorla, E. and J. Hildebrand, “JavaScript Message Security Format,” March 2011.) [I‑D.rescorla‑jsms], both of which significantly influenced this draft. This draft attempts to explicitly reuse as many of the relevant concepts from XML Encryption 1.1 (Eastlake, D., Reagle, J., Roessler, T., and F. Hirsch, “XML Encryption Syntax and Processing Version 1.1,” March 2012.) [W3C.CR‑xmlenc‑core1‑20120313] and RFC 5652 (Housley, R., “Cryptographic Message Syntax (CMS),” September 2009.) [RFC5652] as possible, while utilizing simple, compact JSON-based data structures.

Special thanks are due to John Bradley and Nat Sakimura for the discussions that helped inform the content of this specification and to Eric Rescorla and Joe Hildebrand for allowing the reuse of text from [I‑D.rescorla‑jsms] (Rescorla, E. and J. Hildebrand, “JavaScript Message Security Format,” March 2011.) in this document.

Thanks to Axel Nennker, Emmanuel Raviart, Brian Campbell, and Edmund Jay for validating the examples in this specification.

This specification is the work of the JOSE Working Group, which includes dozens of active and dedicated participants. In particular, the following individuals contributed ideas, feedback, and wording that influenced this specification:

Richard Barnes, John Bradley, Brian Campbell, Breno de Medeiros, Dick Hardt, Jeff Hodges, Edmund Jay, James Manger, Matt Miller, Tony Nadalin, Axel Nennker, Emmanuel Raviart, Nat Sakimura, Jim Schaad, Hannes Tschofenig, and Sean Turner.

Jim Schaad and Karen O'Donoghue chaired the JOSE working group and Sean Turner and Stephen Farrell served as Security area directors during the creation of this specification.



 TOC 

Appendix D.  Document History

[[ to be removed by the RFC Editor before publication as an RFC ]]

-19

-18

-17

-16

-15

-14

-13

-12

-11

-10

-09

-08

-07

-06

-05

-04

-03

-02

-01

-00



 TOC 

Authors' Addresses

  Michael B. Jones
  Microsoft
Email:  mbj@microsoft.com
URI:  http://self-issued.info/
  
  Eric Rescorla
  RTFM, Inc.
Email:  ekr@rtfm.com
  
  Joe Hildebrand
  Cisco Systems, Inc.
Email:  jhildebr@cisco.com